1Binding for the Synopsys HSDK reset controller 2 3This binding uses the common reset binding[1]. 4 5[1] Documentation/devicetree/bindings/reset/reset.txt 6 7Required properties: 8- compatible: should be "snps,hsdk-reset". 9- reg: should always contain 2 pairs address - length: first for reset 10 configuration register and second for corresponding SW reset and status bits 11 register. 12- #reset-cells: from common reset binding; Should always be set to 1. 13 14Example: 15 reset: reset@880 { 16 compatible = "snps,hsdk-reset"; 17 #reset-cells = <1>; 18 reg = <0x8A0 0x4>, <0xFF0 0x4>; 19 }; 20 21Specifying reset lines connected to IP modules: 22 ethernet@.... { 23 .... 24 resets = <&reset HSDK_V1_ETH_RESET>; 25 .... 26 }; 27 28The index could be found in <dt-bindings/reset/snps,hsdk-reset.h> 29