1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/regulator/richtek,rt5190a-regulator.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Richtek RT5190A PMIC Regulator 8 9maintainers: 10 - ChiYuan Huang <cy_huang@richtek.com> 11 12description: | 13 The RT5190A integrates 1 channel buck controller, 3 channels high efficiency 14 synchronous buck converters, 1 LDO, I2C control interface and peripherial 15 logical control. 16 17 It also supports mute AC OFF depop sound and quick setting storage while 18 input power is removed. 19 20properties: 21 compatible: 22 enum: 23 - richtek,rt5190a 24 25 reg: 26 maxItems: 1 27 28 interrupts: 29 maxItems: 1 30 31 vin2-supply: 32 description: phandle to buck2 input voltage. 33 34 vin3-supply: 35 description: phandle to buck3 input voltage. 36 37 vin4-supply: 38 description: phandle to buck4 input voltage. 39 40 vinldo-supply: 41 description: phandle to ldo input voltage 42 43 richtek,mute-enable: 44 description: | 45 The mute function uses 'mutein', 'muteout', and 'vdet' pins as the control 46 signal. When enabled, The normal behavior is to bypass the 'mutein' signal 47 'muteout'. But if the power source removal is detected from 'vdet', 48 whatever the 'mutein' signal is, it will pull down the 'muteout' to force 49 speakers mute. this function is commonly used to prevent the speaker pop 50 noise during AC power turned off in the modern TV system design. 51 type: boolean 52 53 regulators: 54 type: object 55 56 patternProperties: 57 "^buck[1-4]$|^ldo$": 58 type: object 59 $ref: regulator.yaml# 60 description: | 61 regulator description for buck1 to buck4, and ldo. 62 63 properties: 64 regulator-allowed-modes: 65 description: | 66 buck operating mode, only buck1/4 support mode operating. 67 0: auto mode 68 1: force pwm mode 69 items: 70 enum: [0, 1] 71 72 richtek,latchup-enable: 73 type: boolean 74 description: | 75 If specified, undervolt protection mode changes from the default 76 hiccup to latchup. 77 78 unevaluatedProperties: false 79 80 additionalProperties: false 81 82required: 83 - compatible 84 - reg 85 - regulators 86 87additionalProperties: false 88 89examples: 90 - | 91 #include <dt-bindings/interrupt-controller/irq.h> 92 #include <dt-bindings/regulator/richtek,rt5190a-regulator.h> 93 94 i2c { 95 #address-cells = <1>; 96 #size-cells = <0>; 97 98 pmic@64 { 99 compatible = "richtek,rt5190a"; 100 reg = <0x64>; 101 interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>; 102 vin2-supply = <&rt5190_buck1>; 103 vin3-supply = <&rt5190_buck1>; 104 vin4-supply = <&rt5190_buck1>; 105 106 regulators { 107 rt5190_buck1: buck1 { 108 regulator-name = "rt5190a-buck1"; 109 regulator-min-microvolt = <5090000>; 110 regulator-max-microvolt = <5090000>; 111 regulator-allowed-modes = <RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>; 112 regulator-boot-on; 113 }; 114 buck2 { 115 regulator-name = "rt5190a-buck2"; 116 regulator-min-microvolt = <600000>; 117 regulator-max-microvolt = <1400000>; 118 regulator-boot-on; 119 }; 120 buck3 { 121 regulator-name = "rt5190a-buck3"; 122 regulator-min-microvolt = <600000>; 123 regulator-max-microvolt = <1400000>; 124 regulator-boot-on; 125 }; 126 buck4 { 127 regulator-name = "rt5190a-buck4"; 128 regulator-min-microvolt = <850000>; 129 regulator-max-microvolt = <850000>; 130 regulator-allowed-modes = <RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>; 131 regulator-boot-on; 132 }; 133 ldo { 134 regulator-name = "rt5190a-ldo"; 135 regulator-min-microvolt = <1200000>; 136 regulator-max-microvolt = <1200000>; 137 regulator-boot-on; 138 }; 139 }; 140 }; 141 }; 142