1* Powerventure Semiconductor PV88090 Voltage Regulator 2 3Required properties: 4- compatible: "pvs,pv88090". 5- reg: I2C slave address, usually 0x48. 6- interrupts: the interrupt outputs of the controller 7- regulators: A node that houses a sub-node for each regulator within the 8 device. Each sub-node is identified using the node's name, with valid 9 values listed below. The content of each sub-node is defined by the 10 standard binding for regulators; see regulator.txt. 11 BUCK1, BUCK2, BUCK3, LDO1, and LDO2. 12 13Optional properties: 14- Any optional property defined in regulator.txt 15 16Example 17 18 pmic: pv88090@48 { 19 compatible = "pvs,pv88090"; 20 reg = <0x48>; 21 interrupt-parent = <&gpio>; 22 interrupts = <24 24>; 23 24 regulators { 25 BUCK1 { 26 regulator-name = "buck1"; 27 regulator-min-microvolt = < 600000>; 28 regulator-max-microvolt = <1393750>; 29 regulator-min-microamp = < 220000>; 30 regulator-max-microamp = <7040000>; 31 regulator-boot-on; 32 }; 33 34 BUCK2 { 35 regulator-name = "buck2"; 36 regulator-min-microvolt = < 600000>; 37 regulator-max-microvolt = <1393750>; 38 regulator-min-microamp = <1496000>; 39 regulator-max-microamp = <4189000>; 40 }; 41 42 BUCK3 { 43 regulator-name = "buck3"; 44 regulator-min-microvolt = <600000>; 45 regulator-max-microvolt = <1393750>; 46 regulator-min-microamp = <1496000>; 47 regulator-max-microamp = <4189000>; 48 regulator-boot-on; 49 }; 50 51 LDO1 { 52 regulator-name = "ldo1"; 53 regulator-min-microvolt = <1200000>; 54 regulator-max-microvolt = <4350000>; 55 regulator-boot-on; 56 }; 57 58 LDO2 { 59 regulator-name = "ldo2"; 60 regulator-min-microvolt = < 650000>; 61 regulator-max-microvolt = <2225000>; 62 regulator-boot-on; 63 }; 64 }; 65 }; 66