1TWL BCI (Battery Charger Interface) 2 3The battery charger needs to interact with the USB phy in order 4to know when charging is permissible, and when there is a connection 5or disconnection. 6 7The choice of phy cannot be configured at a hardware level, so there 8is no value in explicit configuration in device-tree. Rather 9if there is a sibling of the BCI node which is compatible with 10"ti,twl4030-usb", then that is used to determine when and how 11use USB power for charging. 12 13Required properties: 14- compatible: 15 - "ti,twl4030-bci" 16- interrupts: two interrupt lines from the TWL SIH (secondary 17 interrupt handler) - interrupts 9 and 2. 18 19Optional properties: 20- ti,bb-uvolt: microvolts for charging the backup battery. 21- ti,bb-uamp: microamps for charging the backup battery. 22 23Examples: 24 25bci { 26 compatible = "ti,twl4030-bci"; 27 interrupts = <9>, <2>; 28 ti,bb-uvolt = <3200000>; 29 ti,bb-uamp = <150>; 30}; 31