1# SPDX-License-Identifier: GPL-2.0 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/power/supply/ti,lp8727.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: TI/National Semiconductor LP8727 Charger 8 9maintainers: 10 - Sebastian Reichel <sre@kernel.org> 11 12allOf: 13 - $ref: power-supply.yaml# 14 15properties: 16 compatible: 17 const: ti,lp8727 18 19 reg: 20 const: 0x27 21 22 interrupts: 23 maxItems: 1 24 25 debounce-ms: 26 description: interrupt debounce time in ms 27 28patternProperties: 29 '^(ac|usb)$': 30 type: object 31 additionalProperties: false 32 description: USB/AC charging parameters 33 properties: 34 charger-type: 35 enum: 36 - ac 37 - usb 38 39 eoc-level: 40 $ref: /schemas/types.yaml#/definitions/uint8 41 minimum: 0 42 maximum: 6 43 description: | 44 End of Charge Percentage with the following mapping: 45 0 = 5%, 1 = 10%, 2 = 16%, 3 = 20%, 4 = 25%, 5 = 33%, 6 = 50% 46 47 charging-current: 48 $ref: /schemas/types.yaml#/definitions/uint8 49 minimum: 0 50 maximum: 9 51 description: | 52 Charging current with the following mapping: 53 0 = 90mA, 1 = 100mA, 2 = 400mA, 3 = 450mA, 4 = 500mA, 5 = 600mA, 54 6 = 700mA, 7 = 800mA, 8 = 900mA, 9 = 1000mA 55 56required: 57 - compatible 58 - reg 59 60additionalProperties: false 61 62examples: 63 - | 64 #include <dt-bindings/interrupt-controller/irq.h> 65 i2c { 66 #address-cells = <1>; 67 #size-cells = <0>; 68 69 lp8727: charger@27 { 70 compatible = "ti,lp8727"; 71 reg = <0x27>; 72 interrupt-parent = <&gpio5>; 73 interrupts = <6 IRQ_TYPE_EDGE_FALLING>; 74 debounce-ms = <300>; 75 76 /* AC charger: 5% EOC and 500mA charging current */ 77 ac { 78 charger-type = "ac"; 79 eoc-level = /bits/ 8 <0>; 80 charging-current = /bits/ 8 <4>; 81 }; 82 83 /* USB charger: 10% EOC and 400mA charging current */ 84 usb { 85 charger-type = "usb"; 86 eoc-level = /bits/ 8 <1>; 87 charging-current = /bits/ 8 <2>; 88 }; 89 }; 90 }; 91