1Devicetree bindings for Maxim DS2760 2==================================== 3 4The ds2760 is a w1 slave device and must hence have its sub-node in DT 5under a w1 bus master node. 6 7The device exposes a power supply, so the details described in 8Documentation/devicetree/bindings/power/supply/power_supply.txt apply. 9 10Required properties: 11- compatible: must be "maxim,ds2760" 12 13Optional properties: 14- power-supplies: Refers to one or more power supplies connected to 15 this battery. 16- maxim,pmod-enabled: This boolean property enables the DS2760 to enter 17 sleep mode when the DQ line goes low for greater 18 than 2 seconds and leave sleep Mode when the DQ 19 line goes high. 20- maxim,cache-time-ms: Time im milliseconds to cache the data for. When 21 this time expires, the values are read again from 22 the hardware. Defaults to 1000. 23- rated-capacity-microamp-hours: 24 The rated capacity of the battery, in mAh. 25 If not specified, the value stored in the 26 non-volatile chip memory is used. 27