1Motorola CPCAP PMIC battery charger binding 2 3Required properties: 4- compatible: Shall be "motorola,mapphone-cpcap-charger" 5- interrupts: Interrupt specifier for each name in interrupt-names 6- interrupt-names: Should contain the following entries: 7 "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn", 8 "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld", 9 "battdetb" 10- io-channels: IIO ADC channel specifier for each name in io-channel-names 11- io-channel-names: Should contain the following entries: 12 "battdetb", "battp", "vbus", "chg_isense", "batti" 13 14Optional properties: 15- mode-gpios: Optionally CPCAP charger can have a companion wireless 16 charge controller that is controlled with two GPIOs 17 that are active low. 18 19Example: 20 21cpcap_charger: charger { 22 compatible = "motorola,mapphone-cpcap-charger"; 23 interrupts-extended = < 24 &cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0 25 &cpcap 22 0 &cpcap 21 0 &cpcap 20 0 &cpcap 19 0 26 &cpcap 54 0 27 >; 28 interrupt-names = 29 "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn", 30 "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld", 31 "battdetb"; 32 mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW 33 &gpio3 23 GPIO_ACTIVE_LOW>; 34 io-channels = <&cpcap_adc 0 &cpcap_adc 1 35 &cpcap_adc 2 &cpcap_adc 5 36 &cpcap_adc 6>; 37 io-channel-names = "battdetb", "battp", 38 "vbus", "chg_isense", 39 "batti"; 40}; 41