1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/pinctrl/renesas,rzg2l-pinctrl.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Renesas RZ/{G2L,V2L} combined Pin and GPIO controller 8 9maintainers: 10 - Geert Uytterhoeven <geert+renesas@glider.be> 11 - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> 12 13description: 14 The Renesas SoCs of the RZ/{G2L,V2L} alike series feature a combined Pin and 15 GPIO controller. 16 Pin multiplexing and GPIO configuration is performed on a per-pin basis. 17 Each port features up to 8 pins, each of them configurable for GPIO function 18 (port mode) or in alternate function mode. 19 Up to 8 different alternate function modes exist for each single pin. 20 21properties: 22 compatible: 23 oneOf: 24 - items: 25 - enum: 26 - renesas,r9a07g043-pinctrl # RZ/G2UL{Type-1,Type-2} 27 - renesas,r9a07g044-pinctrl # RZ/G2{L,LC} 28 29 - items: 30 - enum: 31 - renesas,r9a07g054-pinctrl # RZ/V2L 32 - const: renesas,r9a07g044-pinctrl # RZ/G2{L,LC} fallback for RZ/V2L 33 34 reg: 35 maxItems: 1 36 37 gpio-controller: true 38 39 '#gpio-cells': 40 const: 2 41 description: 42 The first cell contains the global GPIO port index, constructed using the 43 RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h> and the 44 second cell represents consumer flag as mentioned in ../gpio/gpio.txt 45 E.g. "RZG2L_GPIO(39, 1)" for P39_1. 46 47 gpio-ranges: 48 maxItems: 1 49 50 interrupt-controller: true 51 52 '#interrupt-cells': 53 const: 2 54 description: 55 The first cell contains the global GPIO port index, constructed using the 56 RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h> and the 57 second cell is used to specify the flag. 58 E.g. "interrupts = <RZG2L_GPIO(43, 0) IRQ_TYPE_EDGE_FALLING>;" if P43_0 is 59 being used as an interrupt. 60 61 clocks: 62 maxItems: 1 63 64 power-domains: 65 maxItems: 1 66 67 resets: 68 items: 69 - description: GPIO_RSTN signal 70 - description: GPIO_PORT_RESETN signal 71 - description: GPIO_SPARE_RESETN signal 72 73additionalProperties: 74 anyOf: 75 - type: object 76 allOf: 77 - $ref: pincfg-node.yaml# 78 - $ref: pinmux-node.yaml# 79 80 description: 81 Pin controller client devices use pin configuration subnodes (children 82 and grandchildren) for desired pin configuration. 83 Client device subnodes use below standard properties. 84 85 properties: 86 phandle: true 87 pinmux: 88 description: 89 Values are constructed from GPIO port number, pin number, and 90 alternate function configuration number using the RZG2L_PORT_PINMUX() 91 helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h>. 92 pins: true 93 drive-strength: 94 enum: [ 2, 4, 8, 12 ] 95 output-impedance-ohms: 96 enum: [ 33, 50, 66, 100 ] 97 power-source: 98 description: I/O voltage in millivolt. 99 enum: [ 1800, 2500, 3300 ] 100 slew-rate: true 101 gpio-hog: true 102 gpios: true 103 input-enable: true 104 output-high: true 105 output-low: true 106 line-name: true 107 108 - type: object 109 properties: 110 phandle: true 111 112 additionalProperties: 113 $ref: "#/additionalProperties/anyOf/0" 114 115allOf: 116 - $ref: "pinctrl.yaml#" 117 118required: 119 - compatible 120 - reg 121 - gpio-controller 122 - '#gpio-cells' 123 - gpio-ranges 124 - interrupt-controller 125 - '#interrupt-cells' 126 - clocks 127 - power-domains 128 - resets 129 130examples: 131 - | 132 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> 133 #include <dt-bindings/clock/r9a07g044-cpg.h> 134 135 pinctrl: pinctrl@11030000 { 136 compatible = "renesas,r9a07g044-pinctrl"; 137 reg = <0x11030000 0x10000>; 138 139 gpio-controller; 140 #gpio-cells = <2>; 141 gpio-ranges = <&pinctrl 0 0 392>; 142 interrupt-controller; 143 #interrupt-cells = <2>; 144 clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>; 145 resets = <&cpg R9A07G044_GPIO_RSTN>, 146 <&cpg R9A07G044_GPIO_PORT_RESETN>, 147 <&cpg R9A07G044_GPIO_SPARE_RESETN>; 148 power-domains = <&cpg>; 149 150 scif0_pins: serial0 { 151 pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* Tx */ 152 <RZG2L_PORT_PINMUX(38, 1, 1)>; /* Rx */ 153 }; 154 155 i2c1_pins: i2c1 { 156 pins = "RIIC1_SDA", "RIIC1_SCL"; 157 input-enable; 158 }; 159 160 sd1-pwr-en-hog { 161 gpio-hog; 162 gpios = <RZG2L_GPIO(39, 2) 0>; 163 output-high; 164 line-name = "sd1_pwr_en"; 165 }; 166 167 sdhi1_pins: sd1 { 168 sd1_mux { 169 pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */ 170 <RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */ 171 power-source = <3300>; 172 }; 173 174 sd1_data { 175 pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; 176 power-source = <3300>; 177 }; 178 179 sd1_ctrl { 180 pins = "SD1_CLK", "SD1_CMD"; 181 power-source = <3300>; 182 }; 183 }; 184 }; 185