xref: /freebsd/sys/contrib/device-tree/Bindings/pinctrl/qcom,sm8550-tlmm.yaml (revision 2e3507c25e42292b45a5482e116d278f5515d04d) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/qcom,sm8550-tlmm.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm Technologies, Inc. SM8550 TLMM block
8
9maintainers:
10  - Abel Vesa <abel.vesa@linaro.org>
11
12description:
13  Top Level Mode Multiplexer pin controller in Qualcomm SM8550 SoC.
14
15allOf:
16  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
17
18properties:
19  compatible:
20    const: qcom,sm8550-tlmm
21
22  reg:
23    maxItems: 1
24
25  interrupts: true
26  interrupt-controller: true
27  "#interrupt-cells": true
28  gpio-controller: true
29
30  gpio-reserved-ranges:
31    minItems: 1
32    maxItems: 105
33
34  gpio-line-names:
35    maxItems: 210
36
37  "#gpio-cells": true
38  gpio-ranges: true
39  wakeup-parent: true
40
41patternProperties:
42  "-state$":
43    oneOf:
44      - $ref: "#/$defs/qcom-sm8550-tlmm-state"
45      - patternProperties:
46          "-pins$":
47            $ref: "#/$defs/qcom-sm8550-tlmm-state"
48        additionalProperties: false
49
50$defs:
51  qcom-sm8550-tlmm-state:
52    type: object
53    description:
54      Pinctrl node's client devices use subnodes for desired pin configuration.
55      Client device subnodes use below standard properties.
56    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
57    unevaluatedProperties: false
58
59    properties:
60      pins:
61        description:
62          List of gpio pins affected by the properties specified in this
63          subnode.
64        items:
65          oneOf:
66            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
67            - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
68        minItems: 1
69        maxItems: 36
70
71      function:
72        description:
73          Specify the alternative function to be configured for the specified
74          pins.
75        enum: [ aon_cci, aoss_cti, atest_char, atest_usb,
76                audio_ext_mclk0, audio_ext_mclk1, audio_ref_clk,
77                cam_aon_mclk4, cam_mclk, cci_async_in, cci_i2c_scl,
78                cci_i2c_sda, cci_timer, cmu_rng, coex_uart1_rx,
79                coex_uart1_tx, coex_uart2_rx, coex_uart2_tx,
80                cri_trng, dbg_out_clk, ddr_bist_complete,
81                ddr_bist_fail, ddr_bist_start, ddr_bist_stop,
82                ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot,
83                gcc_gp1, gcc_gp2, gcc_gp3, gpio, i2chub0_se0,
84                i2chub0_se1, i2chub0_se2, i2chub0_se3, i2chub0_se4,
85                i2chub0_se5, i2chub0_se6, i2chub0_se7, i2chub0_se8,
86                i2chub0_se9, i2s0_data0, i2s0_data1, i2s0_sck,
87                i2s0_ws, i2s1_data0, i2s1_data1, i2s1_sck, i2s1_ws,
88                ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0_out,
89                mdp_vsync1_out, mdp_vsync2_out, mdp_vsync3_out,
90                mdp_vsync_e, nav_gpio0, nav_gpio1, nav_gpio2,
91                pcie0_clk_req_n, pcie1_clk_req_n, phase_flag,
92                pll_bist_sync, pll_clk_aux, prng_rosc0, prng_rosc1,
93                prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio,
94                qlink0_enable, qlink0_request, qlink0_wmss,
95                qlink1_enable, qlink1_request, qlink1_wmss,
96                qlink2_enable, qlink2_request, qlink2_wmss,
97                qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs,
98                qup1_se0, qup1_se1, qup1_se2, qup1_se3, qup1_se4,
99                qup1_se5, qup1_se6, qup1_se7, qup2_se0,
100                qup2_se0_l0_mira, qup2_se0_l0_mirb, qup2_se0_l1_mira,
101                qup2_se0_l1_mirb, qup2_se0_l2_mira, qup2_se0_l2_mirb,
102                qup2_se0_l3_mira, qup2_se0_l3_mirb, qup2_se1,
103                qup2_se2, qup2_se3, qup2_se4, qup2_se5, qup2_se6,
104                qup2_se7, sd_write_protect, sdc40, sdc41, sdc42,
105                sdc43, sdc4_clk, sdc4_cmd, tb_trig_sdc2, tb_trig_sdc4,
106                tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout,
107                tgu_ch3_trigout, tmess_prng0, tmess_prng1, tmess_prng2,
108                tmess_prng3, tsense_pwm1, tsense_pwm2, tsense_pwm3,
109                uim0_clk, uim0_data, uim0_present, uim0_reset,
110                uim1_clk, uim1_data, uim1_present, uim1_reset,
111                usb1_hs, usb_phy, vfr_0, vfr_1, vsense_trigger_mirnat ]
112
113    required:
114      - pins
115
116required:
117  - compatible
118  - reg
119
120additionalProperties: false
121
122examples:
123  - |
124    #include <dt-bindings/interrupt-controller/arm-gic.h>
125    tlmm: pinctrl@f100000 {
126        compatible = "qcom,sm8550-tlmm";
127        reg = <0x0f100000 0x300000>;
128        gpio-controller;
129        #gpio-cells = <2>;
130        gpio-ranges = <&tlmm 0 0 211>;
131        interrupt-controller;
132        #interrupt-cells = <2>;
133        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
134
135        gpio-wo-state {
136            pins = "gpio1";
137            function = "gpio";
138        };
139
140        uart-w-state {
141            rx-pins {
142                pins = "gpio26";
143                function = "qup2_se7";
144                bias-pull-up;
145            };
146
147            tx-pins {
148                pins = "gpio27";
149                function = "qup2_se7";
150                bias-disable;
151            };
152        };
153    };
154...
155