xref: /freebsd/sys/contrib/device-tree/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml (revision 8bab661a3316d8bd9b9fbd11a3b4371b91507bd2) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm SC7280 SoC LPASS LPI TLMM
8
9maintainers:
10  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
11
12description:
13  Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
14  (LPASS) Low Power Island (LPI) of Qualcomm SC7280 SoC.
15
16properties:
17  compatible:
18    const: qcom,sc7280-lpass-lpi-pinctrl
19
20  qcom,adsp-bypass-mode:
21    description:
22      Tells ADSP is in bypass mode.
23    type: boolean
24
25  reg:
26    maxItems: 2
27
28  gpio-controller: true
29
30  "#gpio-cells":
31    description: Specifying the pin number and flags, as defined in
32      include/dt-bindings/gpio/gpio.h
33    const: 2
34
35  gpio-ranges:
36    maxItems: 1
37
38patternProperties:
39  "-state$":
40    oneOf:
41      - $ref: "#/$defs/qcom-sc7280-lpass-state"
42      - patternProperties:
43          "-pins$":
44            $ref: "#/$defs/qcom-sc7280-lpass-state"
45        additionalProperties: false
46
47$defs:
48  qcom-sc7280-lpass-state:
49    type: object
50    description:
51      Pinctrl node's client devices use subnodes for desired pin configuration.
52      Client device subnodes use below standard properties.
53    $ref: "/schemas/pinctrl/pincfg-node.yaml"
54
55    properties:
56      pins:
57        description:
58          List of gpio pins affected by the properties specified in this
59          subnode.
60        items:
61          oneOf:
62            - pattern: "^gpio([0-9]|[1-9][0-9])$"
63        minItems: 1
64        maxItems: 15
65
66      function:
67        enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws,
68                qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk,
69                dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data,
70                i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk,
71                dmic3_data, i2s2_data ]
72        description:
73          Specify the alternative function to be configured for the specified
74          pins.
75
76      drive-strength:
77        enum: [2, 4, 6, 8, 10, 12, 14, 16]
78        default: 2
79        description:
80          Selects the drive strength for the specified pins, in mA.
81
82      slew-rate:
83        enum: [0, 1, 2, 3]
84        default: 0
85        description: |
86            0: No adjustments
87            1: Higher Slew rate (faster edges)
88            2: Lower Slew rate (slower edges)
89            3: Reserved (No adjustments)
90
91      bias-pull-down: true
92      bias-pull-up: true
93      bias-bus-hold: true
94      bias-disable: true
95      output-high: true
96      output-low: true
97
98    required:
99      - pins
100      - function
101
102    additionalProperties: false
103
104required:
105  - compatible
106  - reg
107  - gpio-controller
108  - "#gpio-cells"
109  - gpio-ranges
110
111additionalProperties: false
112
113examples:
114  - |
115    lpass_tlmm: pinctrl@33c0000 {
116        compatible = "qcom,sc7280-lpass-lpi-pinctrl";
117        reg = <0x33c0000 0x20000>,
118              <0x3550000 0x10000>;
119        gpio-controller;
120        #gpio-cells = <2>;
121        gpio-ranges = <&lpass_tlmm 0 0 15>;
122
123        dmic01-state {
124            dmic01-clk-pins {
125                pins = "gpio6";
126                function = "dmic1_clk";
127            };
128
129            dmic01-clk-sleep-pins {
130                pins = "gpio6";
131                function = "dmic1_clk";
132            };
133        };
134
135        tx-swr-data-sleep-state {
136            pins = "gpio1", "gpio2", "gpio14";
137            function = "swr_tx_data";
138        };
139    };
140