xref: /freebsd/sys/contrib/device-tree/Bindings/pinctrl/qcom,msm8974-pinctrl.yaml (revision b59017c5cad90d0f09a59e68c00457b7faf93e7c) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/qcom,msm8974-pinctrl.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm MSM8974 TLMM pin controller
8
9maintainers:
10  - Bjorn Andersson <andersson@kernel.org>
11  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
12
13description:
14  Top Level Mode Multiplexer pin controller in Qualcomm MSM8974 SoC.
15
16properties:
17  compatible:
18    const: qcom,msm8974-pinctrl
19
20  reg:
21    maxItems: 1
22
23  interrupts:
24    maxItems: 1
25
26  gpio-reserved-ranges:
27    minItems: 1
28    maxItems: 73
29
30  gpio-line-names:
31    maxItems: 146
32
33patternProperties:
34  "-state$":
35    oneOf:
36      - $ref: "#/$defs/qcom-msm8974-tlmm-state"
37      - patternProperties:
38          "-pins$":
39            $ref: "#/$defs/qcom-msm8974-tlmm-state"
40        additionalProperties: false
41
42$defs:
43  qcom-msm8974-tlmm-state:
44    type: object
45    description:
46      Pinctrl node's client devices use subnodes for desired pin configuration.
47      Client device subnodes use below standard properties.
48    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
49    unevaluatedProperties: false
50
51    properties:
52      pins:
53        description:
54          List of gpio pins affected by the properties specified in this
55          subnode.
56        items:
57          oneOf:
58            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-5])$"
59            - enum: [ hsic_data, hsic_strobe, sdc1_clk, sdc1_cmd, sdc1_data,
60                      sdc2_clk, sdc2_cmd, sdc2_data ]
61        minItems: 1
62        maxItems: 36
63
64      function:
65        description:
66          Specify the alternative function to be configured for the specified
67          pins.
68
69        enum: [ gpio, cci_i2c0, cci_i2c1, uim1, uim2, uim_batt_alarm,
70                blsp_uim1, blsp_uart1, blsp_i2c1, blsp_spi1, blsp_uim2,
71                blsp_uart2, blsp_i2c2, blsp_spi2, blsp_uim3, blsp_uart3,
72                blsp_i2c3, blsp_spi3, blsp_uim4, blsp_uart4, blsp_i2c4,
73                blsp_spi4, blsp_uim5, blsp_uart5, blsp_i2c5, blsp_spi5,
74                blsp_uim6, blsp_uart6, blsp_i2c6, blsp_spi6, blsp_uim7,
75                blsp_uart7, blsp_i2c7, blsp_spi7, blsp_uim8, blsp_uart8,
76                blsp_i2c8, blsp_spi8, blsp_uim9, blsp_uart9, blsp_i2c9,
77                blsp_spi9, blsp_uim10, blsp_uart10, blsp_i2c10, blsp_spi10,
78                blsp_uim11, blsp_uart11, blsp_i2c11, blsp_spi11, blsp_uim12,
79                blsp_uart12, blsp_i2c12, blsp_spi12, blsp_spi1_cs1,
80                blsp_spi2_cs2, blsp_spi_cs3, blsp_spi2_cs1, blsp_spi2_cs2
81                blsp_spi2_cs3, blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3,
82                sdc3, sdc4, gcc_gp_clk1, gcc_gp_clk2, gcc_gp_clk3, cci_timer0,
83                cci_timer1, cci_timer2, cci_timer3, cci_async_in0,
84                cci_async_in1, cci_async_in2, cam_mckl0, cam_mclk1, cam_mclk2,
85                cam_mclk3, mdp_vsync, hdmi_cec, hdmi_ddc, hdmi_hpd, edp_hpd,
86                gp_pdm0, gp_pdm1, gp_pdm2, gp_pdm3, gp0_clk, gp1_clk, gp_mn,
87                tsif1, tsif2, hsic, grfc, audio_ref_clk, qua_mi2s, pri_mi2s,
88                spkr_mi2s, ter_mi2s, sec_mi2s, bt, fm, wlan, slimbus, hsic_ctl ]
89
90    required:
91      - pins
92
93    allOf:
94      - if:
95          properties:
96            pins:
97              contains:
98                enum:
99                  - hsic_data
100                  - hsic_strobe
101          required:
102            - pins
103        then:
104          properties:
105            bias-pull-down: false
106            bias-pull-up: false
107            bias-disable: false
108            drive-strength: false
109            input-enable: false
110            output-high: false
111            output-low: false
112
113allOf:
114  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
115
116required:
117  - compatible
118  - reg
119
120unevaluatedProperties: false
121
122examples:
123  - |
124    #include <dt-bindings/interrupt-controller/arm-gic.h>
125    tlmm: pinctrl@fd510000 {
126        compatible = "qcom,msm8974-pinctrl";
127        reg = <0xfd510000 0x4000>;
128        gpio-controller;
129        gpio-ranges = <&tlmm 0 0 146>;
130        #gpio-cells = <2>;
131        interrupt-controller;
132        #interrupt-cells = <2>;
133        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
134
135        sdc1-off-state {
136            clk-pins {
137                pins = "sdc1_clk";
138                bias-disable;
139                drive-strength = <2>;
140            };
141
142            cmd-pins {
143                pins = "sdc1_cmd";
144                bias-pull-up;
145                drive-strength = <2>;
146            };
147
148            data-pins {
149                pins = "sdc1_data";
150                bias-pull-up;
151                drive-strength = <2>;
152            };
153        };
154
155        blsp2-uart1-sleep-state {
156            pins = "gpio41", "gpio42", "gpio43", "gpio44";
157            function = "gpio";
158            drive-strength = <2>;
159            bias-pull-down;
160        };
161
162        hsic-state {
163            pins = "hsic_data", "hsic_strobe";
164        };
165    };
166