xref: /freebsd/sys/contrib/device-tree/Bindings/pinctrl/qcom,ipq9574-tlmm.yaml (revision 56b17de1e8360fe131d425de20b5e75ff3ea897c) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/qcom,ipq9574-tlmm.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm Technologies, Inc. IPQ9574 TLMM block
8
9maintainers:
10  - Bjorn Andersson <andersson@kernel.org>
11  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
12
13description:
14  Top Level Mode Multiplexer pin controller in Qualcomm IPQ9574 SoC.
15
16properties:
17  compatible:
18    const: qcom,ipq9574-tlmm
19
20  reg:
21    maxItems: 1
22
23  interrupts:
24    maxItems: 1
25
26  gpio-reserved-ranges:
27    minItems: 1
28    maxItems: 33
29
30  gpio-line-names:
31    maxItems: 65
32
33patternProperties:
34  "-state$":
35    oneOf:
36      - $ref: "#/$defs/qcom-ipq9574-tlmm-state"
37      - patternProperties:
38          "-pins$":
39            $ref: "#/$defs/qcom-ipq9574-tlmm-state"
40        additionalProperties: false
41
42$defs:
43  qcom-ipq9574-tlmm-state:
44    type: object
45    description:
46      Pinctrl node's client devices use subnodes for desired pin configuration.
47      Client device subnodes use below standard properties.
48    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
49    unevaluatedProperties: false
50
51    properties:
52      pins:
53        description:
54          List of gpio pins affected by the properties specified in this
55          subnode.
56        items:
57          pattern: "^gpio([0-9]|[1-5][0-9]|6[0-4])$"
58        minItems: 1
59        maxItems: 8
60
61      function:
62        description:
63          Specify the alternative function to be configured for the specified
64          pins.
65
66        enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
67                audio_pdm0, audio_pdm1, audio_pri, audio_sec, blsp0_spi, blsp0_uart,
68                blsp1_i2c, blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi,
69                blsp2_uart, blsp3_i2c, blsp3_spi, blsp3_uart, blsp4_i2c,
70                blsp4_spi, blsp4_uart, blsp5_i2c, blsp5_uart, cri_trng0,
71                cri_trng1, cri_trng2, cri_trng3, cxc0, cxc1, dbg_out, dwc_ddrphy,
72                gcc_plltest, gcc_tlmm, gpio, mac, mdc, mdio, pcie0_clk, pcie0_wake,
73                pcie1_clk, pcie1_wake, pcie2_clk, pcie2_wake, pcie3_clk, pcie3_wake,
74                prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, pta, pwm,
75                qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0,
76                qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
77                qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a,
78                qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
79                qdss_tracedata_b, qspi_clk, qspi_cs, qspi_data,
80                rx0, rx1, sdc_clk, sdc_cmd, sdc_data, sdc_rclk, tsens_max,
81                wci20, wci21, wsa_swrm ]
82
83    required:
84      - pins
85
86allOf:
87  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
88
89required:
90  - compatible
91  - reg
92
93unevaluatedProperties: false
94
95examples:
96  - |
97    #include <dt-bindings/interrupt-controller/arm-gic.h>
98    tlmm: pinctrl@1000000 {
99        compatible = "qcom,ipq9574-tlmm";
100        reg = <0x01000000 0x300000>;
101        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
102        gpio-controller;
103        #gpio-cells = <2>;
104        interrupt-controller;
105        #interrupt-cells = <2>;
106        gpio-ranges = <&tlmm 0 0 65>;
107
108        uart2-state {
109            pins = "gpio34", "gpio35";
110            function = "blsp2_uart";
111            drive-strength = <8>;
112            bias-pull-down;
113        };
114    };
115