1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8186.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Mediatek MT8186 Pin Controller 8 9maintainers: 10 - Sean Wang <sean.wang@mediatek.com> 11 12description: | 13 The Mediatek's Pin controller is used to control SoC pins. 14 15properties: 16 compatible: 17 const: mediatek,mt8186-pinctrl 18 19 gpio-controller: true 20 21 '#gpio-cells': 22 description: | 23 Number of cells in GPIO specifier. Since the generic GPIO binding is used, 24 the amount of cells must be specified as 2. See the below 25 mentioned gpio binding representation for description of particular cells. 26 const: 2 27 28 gpio-ranges: 29 maxItems: 1 30 31 gpio-line-names: true 32 33 reg: 34 description: | 35 Physical address base for gpio base registers. There are 8 different GPIO 36 physical address base in mt8186. 37 maxItems: 8 38 39 reg-names: 40 description: | 41 Gpio base register names. 42 items: 43 - const: iocfg0 44 - const: iocfg_bm 45 - const: iocfg_bl 46 - const: iocfg_br 47 - const: iocfg_lm 48 - const: iocfg_rb 49 - const: iocfg_tl 50 - const: eint 51 52 interrupt-controller: true 53 54 '#interrupt-cells': 55 const: 2 56 57 interrupts: 58 description: The interrupt outputs to sysirq 59 maxItems: 1 60 61 mediatek,rsel-resistance-in-si-unit: 62 type: boolean 63 description: | 64 Identifying i2c pins pull up/down type which is RSEL. It can support 65 RSEL define or si unit value(ohm) to set different resistance. 66 67# PIN CONFIGURATION NODES 68patternProperties: 69 '-pins$': 70 type: object 71 additionalProperties: false 72 patternProperties: 73 '^pins': 74 type: object 75 additionalProperties: false 76 description: | 77 A pinctrl node should contain at least one subnodes representing the 78 pinctrl groups available on the machine. Each subnode will list the 79 pins it needs, and how they should be configured, with regard to muxer 80 configuration, pullups, drive strength, input enable/disable and 81 input schmitt. 82 An example of using macro: 83 pincontroller { 84 /* GPIO0 set as multifunction GPIO0 */ 85 gpio-pins { 86 pins { 87 pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; 88 } 89 }; 90 /* GPIO128 set as multifunction SDA0 */ 91 i2c0-pins { 92 pins { 93 pinmux = <PINMUX_GPIO128__FUNC_SDA0>; 94 } 95 }; 96 }; 97 $ref: "pinmux-node.yaml" 98 99 properties: 100 pinmux: 101 description: | 102 Integer array, represents gpio pin number and mux setting. 103 Supported pin number and mux varies for different SoCs, and are 104 defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h 105 directly. 106 107 drive-strength: 108 enum: [2, 4, 6, 8, 10, 12, 14, 16] 109 110 drive-strength-microamp: 111 enum: [125, 250, 500, 1000] 112 113 bias-pull-down: 114 oneOf: 115 - type: boolean 116 - enum: [100, 101, 102, 103] 117 description: mt8186 pull down PUPD/R0/R1 type define value. 118 - enum: [200, 201, 202, 203] 119 description: mt8186 pull down RSEL type define value. 120 - enum: [75000, 5000] 121 description: mt8186 pull down RSEL type si unit value(ohm). 122 description: | 123 For pull down type is normal, it don't need add RSEL & R1R0 define 124 and resistance value. 125 For pull down type is PUPD/R0/R1 type, it can add R1R0 define to 126 set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & 127 "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & 128 "MTK_PUPD_SET_R1R0_11" define in mt8186. 129 For pull down type is RSEL, it can add RSEL define & resistance 130 value(ohm) to set different resistance by identifying property 131 "mediatek,rsel-resistance-in-si-unit". 132 It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" 133 & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" 134 define in mt8186. It can also support resistance value(ohm) 135 "75000" & "5000" in mt8186. 136 An example of using RSEL define: 137 pincontroller { 138 i2c0_pin { 139 pins { 140 pinmux = <PINMUX_GPIO128__FUNC_SDA0>; 141 bias-pull-down = <MTK_PULL_SET_RSEL_001>; 142 } 143 }; 144 }; 145 An example of using si unit resistance value(ohm): 146 &pio { 147 mediatek,rsel-resistance-in-si-unit; 148 } 149 pincontroller { 150 i2c0_pin { 151 pins { 152 pinmux = <PINMUX_GPIO128__FUNC_SDA0>; 153 bias-pull-down = <75000>; 154 } 155 }; 156 }; 157 158 bias-pull-up: 159 oneOf: 160 - type: boolean 161 - enum: [100, 101, 102, 103] 162 description: mt8186 pull up PUPD/R0/R1 type define value. 163 - enum: [200, 201, 202, 203] 164 description: mt8186 pull up RSEL type define value. 165 - enum: [1000, 5000, 10000, 75000] 166 description: mt8186 pull up RSEL type si unit value(ohm). 167 description: | 168 For pull up type is normal, it don't need add RSEL & R1R0 define 169 and resistance value. 170 For pull up type is PUPD/R0/R1 type, it can add R1R0 define to 171 set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & 172 "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & 173 "MTK_PUPD_SET_R1R0_11" define in mt8186. 174 For pull up type is RSEL, it can add RSEL define & resistance 175 value(ohm) to set different resistance by identifying property 176 "mediatek,rsel-resistance-in-si-unit". 177 It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" 178 & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" 179 define in mt8186. It can also support resistance value(ohm) 180 "1000" & "5000" & "10000" & "75000" in mt8186. 181 An example of using si unit resistance value(ohm): 182 &pio { 183 mediatek,rsel-resistance-in-si-unit; 184 } 185 pincontroller { 186 i2c0-pins { 187 pins { 188 pinmux = <PINMUX_GPIO128__FUNC_SDA0>; 189 bias-pull-up = <1000>; 190 } 191 }; 192 }; 193 194 bias-disable: true 195 196 output-high: true 197 198 output-low: true 199 200 input-enable: true 201 202 input-disable: true 203 204 input-schmitt-enable: true 205 206 input-schmitt-disable: true 207 208 required: 209 - pinmux 210 211required: 212 - compatible 213 - reg 214 - interrupts 215 - interrupt-controller 216 - '#interrupt-cells' 217 - gpio-controller 218 - '#gpio-cells' 219 - gpio-ranges 220 221additionalProperties: false 222 223examples: 224 - | 225 #include <dt-bindings/pinctrl/mt8186-pinfunc.h> 226 #include <dt-bindings/interrupt-controller/arm-gic.h> 227 228 pio: pinctrl@10005000 { 229 compatible = "mediatek,mt8186-pinctrl"; 230 reg = <0x10005000 0x1000>, 231 <0x10002000 0x0200>, 232 <0x10002200 0x0200>, 233 <0x10002400 0x0200>, 234 <0x10002600 0x0200>, 235 <0x10002A00 0x0200>, 236 <0x10002c00 0x0200>, 237 <0x1000b000 0x1000>; 238 reg-names = "iocfg0", "iocfg_bm", "iocfg_bl", 239 "iocfg_br", "iocfg_lm", "iocfg_rb", 240 "iocfg_tl", "eint"; 241 gpio-controller; 242 #gpio-cells = <2>; 243 gpio-ranges = <&pio 0 0 185>; 244 interrupt-controller; 245 interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>; 246 #interrupt-cells = <2>; 247 248 pio-pins { 249 pins { 250 pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; 251 output-low; 252 }; 253 }; 254 255 spi0-pins { 256 pins-spi { 257 pinmux = <PINMUX_GPIO0__FUNC_SPI0_CLK_B>, 258 <PINMUX_GPIO1__FUNC_SPI0_CSB_B>, 259 <PINMUX_GPIO2__FUNC_SPI0_MO_B>; 260 bias-disable; 261 }; 262 pins-spi-mi { 263 pinmux = <PINMUX_GPIO3__FUNC_SPI0_MI_B>; 264 bias-pull-down; 265 }; 266 }; 267 268 i2c0-pins { 269 pins { 270 pinmux = <PINMUX_GPIO127__FUNC_SCL0>, 271 <PINMUX_GPIO128__FUNC_SDA0>; 272 bias-pull-up = <MTK_PULL_SET_RSEL_001>; 273 drive-strength-microamp = <1000>; 274 }; 275 }; 276 }; 277