1Lantiq FALCON pinmux controller 2 3Required properties: 4- compatible: "lantiq,pinctrl-falcon" 5- reg: Should contain the physical address and length of the gpio/pinmux 6 register range 7 8Please refer to pinctrl-bindings.txt in this directory for details of the 9common pinctrl bindings used by client devices, including the meaning of the 10phrase "pin configuration node". 11 12Lantiq's pin configuration nodes act as a container for an arbitrary number of 13subnodes. Each of these subnodes represents some desired configuration for a 14pin, a group, or a list of pins or groups. This configuration can include the 15mux function to select on those group(s), and two pin configuration parameters: 16pull-up and open-drain 17 18The name of each subnode is not important as long as it is unique; all subnodes 19should be enumerated and processed purely based on their content. 20 21Each subnode only affects those parameters that are explicitly listed. In 22other words, a subnode that lists a mux function but no pin configuration 23parameters implies no information about any pin configuration parameters. 24Similarly, a pin subnode that describes a pullup parameter implies no 25information about e.g. the mux function. 26 27We support 2 types of nodes. 28 29Definition of mux function groups: 30 31Required subnode-properties: 32- lantiq,groups : An array of strings. Each string contains the name of a group. 33 Valid values for these names are listed below. 34- lantiq,function: A string containing the name of the function to mux to the 35 group. Valid values for function names are listed below. 36 37Valid values for group and function names: 38 39 mux groups: 40 por, ntr, ntr8k, hrst, mdio, bootled, asc0, spi, spi cs0, spi cs1, i2c, 41 jtag, slic, pcm, asc1 42 43 functions: 44 rst, ntr, mdio, led, asc, spi, i2c, jtag, slic, pcm 45 46 47Definition of pin configurations: 48 49Required subnode-properties: 50- lantiq,pins : An array of strings. Each string contains the name of a pin. 51 Valid values for these names are listed below. 52 53Optional subnode-properties: 54- lantiq,pull: Integer, representing the pull-down/up to apply to the pin. 55 0: none, 1: down 56- lantiq,drive-current: Boolean, enables drive-current 57- lantiq,slew-rate: Boolean, enables slew-rate 58 59Example: 60 pinmux0 { 61 compatible = "lantiq,pinctrl-falcon"; 62 pinctrl-names = "default"; 63 pinctrl-0 = <&state_default>; 64 65 state_default: pinmux { 66 asc0 { 67 lantiq,groups = "asc0"; 68 lantiq,function = "asc"; 69 }; 70 ntr { 71 lantiq,groups = "ntr8k"; 72 lantiq,function = "ntr"; 73 }; 74 i2c { 75 lantiq,groups = "i2c"; 76 lantiq,function = "i2c"; 77 }; 78 hrst { 79 lantiq,groups = "hrst"; 80 lantiq,function = "rst"; 81 }; 82 }; 83 }; 84