xref: /freebsd/sys/contrib/device-tree/Bindings/pinctrl/intel,pinctrl-keembay.yaml (revision aa1a8ff2d6dbc51ef058f46f3db5a8bb77967145) 
1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/intel,pinctrl-keembay.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Intel Keem Bay pin controller
8
9maintainers:
10  - Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
11
12description: |
13  Intel Keem Bay SoC integrates a pin controller which enables control
14  of pin directions, input/output values and configuration
15  for a total of 80 pins.
16
17properties:
18  compatible:
19    const: intel,keembay-pinctrl
20
21  reg:
22    maxItems: 2
23
24  gpio-controller: true
25
26  '#gpio-cells':
27    const: 2
28
29  ngpios:
30    description: The number of GPIOs exposed.
31    const: 80
32
33  interrupts:
34    description:
35      Specifies the interrupt lines to be used by the controller.
36      Each interrupt line is shared by upto 4 GPIO lines.
37    maxItems: 8
38
39  interrupt-controller: true
40
41  '#interrupt-cells':
42    const: 2
43
44patternProperties:
45  '^gpio@[0-9a-f]*$':
46    type: object
47    additionalProperties: false
48
49    description:
50      Child nodes can be specified to contain pin configuration information,
51      which can then be utilized by pinctrl client devices.
52      The following properties are supported.
53
54    properties:
55      pins:
56        description: |
57          The name(s) of the pins to be configured in the child node.
58          Supported pin names are "GPIO0" up to "GPIO79".
59
60      bias-disable: true
61
62      bias-pull-down: true
63
64      bias-pull-up: true
65
66      drive-strength:
67        description: IO pads drive strength in milli Ampere.
68        enum: [2, 4, 8, 12]
69
70      bias-bus-hold:
71        type: boolean
72
73      input-schmitt-enable:
74        type: boolean
75
76      slew-rate:
77        description: GPIO slew rate control.
78                      0 - Fast(~100MHz)
79                      1 - Slow(~50MHz)
80        enum: [0, 1]
81
82additionalProperties: false
83
84required:
85  - compatible
86  - reg
87  - gpio-controller
88  - ngpios
89  - '#gpio-cells'
90  - interrupts
91  - interrupt-controller
92  - '#interrupt-cells'
93
94examples:
95  - |
96    #include <dt-bindings/interrupt-controller/arm-gic.h>
97    #include <dt-bindings/interrupt-controller/irq.h>
98    // Example 1
99    gpio@0 {
100        compatible = "intel,keembay-pinctrl";
101        reg = <0x600b0000 0x88>,
102              <0x600b0190 0x1ac>;
103        gpio-controller;
104        ngpios = <0x50>;
105        #gpio-cells = <0x2>;
106        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
107                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
108                     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
109                     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
110                     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
111                     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
112                     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
113                     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
114        interrupt-controller;
115        #interrupt-cells = <2>;
116    };
117
118    // Example 2
119    gpio@1 {
120        compatible = "intel,keembay-pinctrl";
121        reg = <0x600c0000 0x88>,
122              <0x600c0190 0x1ac>;
123        gpio-controller;
124        ngpios = <0x50>;
125        #gpio-cells = <0x2>;
126        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
127                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
128                     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
129                     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
130                     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
131                     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
132                     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
133                     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
134        interrupt-controller;
135        #interrupt-cells = <2>;
136    };
137