1Broadcom Northstar2 IOMUX Controller 2 3The Northstar2 IOMUX controller supports group based mux configuration. There 4are some individual pins that support modifying the pinconf parameters. 5 6Required properties: 7 8- compatible: 9 Must be "brcm,ns2-pinmux" 10 11- reg: 12 Define the base and range of the I/O address space that contains the 13 Northstar2 IOMUX and pin configuration registers. 14 15Properties in sub nodes: 16 17- function: 18 The mux function to select 19 20- groups: 21 The list of groups to select with a given function 22 23- pins: 24 List of pin names to change configuration 25 26The generic properties bias-disable, bias-pull-down, bias-pull-up, 27drive-strength, slew-rate, input-enable, input-disable are supported 28for some individual pins listed at the end. 29 30For more details, refer to 31Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt 32 33For example: 34 35 pinctrl: pinctrl@6501d130 { 36 compatible = "brcm,ns2-pinmux"; 37 reg = <0x6501d130 0x08>, 38 <0x660a0028 0x04>, 39 <0x660009b0 0x40>; 40 41 pinctrl-names = "default"; 42 pinctrl-0 = <&nand_sel &uart3_rx &sdio0_d4>; 43 44 /* Select nand function */ 45 nand_sel: nand_sel { 46 function = "nand"; 47 groups = "nand_grp"; 48 }; 49 50 /* Pull up the uart3 rx pin */ 51 uart3_rx: uart3_rx { 52 pins = "uart3_sin"; 53 bias-pull-up; 54 }; 55 56 /* Set the drive strength of sdio d4 pin */ 57 sdio0_d4: sdio0_d4 { 58 pins = "sdio0_data4"; 59 drive-strength = <8>; 60 }; 61 }; 62 63List of supported functions and groups in Northstar2: 64 65"nand": "nand_grp" 66 67"nor": "nor_data_grp", "nor_adv_grp", "nor_addr_0_3_grp", "nor_addr_4_5_grp", 68 "nor_addr_6_7_grp", "nor_addr_8_9_grp", "nor_addr_10_11_grp", 69 "nor_addr_12_15_grp" 70 71"gpio": "gpio_0_1_grp", "gpio_2_5_grp", "gpio_6_7_grp", "gpio_8_9_grp", 72 "gpio_10_11_grp", "gpio_12_13_grp", "gpio_14_17_grp", "gpio_18_19_grp", 73 "gpio_20_21_grp", "gpio_22_23_grp", "gpio_24_25_grp", "gpio_26_27_grp", 74 "gpio_28_29_grp", "gpio_30_31_grp" 75 76"pcie": "pcie_ab1_clk_wak_grp", "pcie_a3_clk_wak_grp", "pcie_b3_clk_wak_grp", 77 "pcie_b2_clk_wak_grp", "pcie_a2_clk_wak_grp" 78 79"uart0": "uart0_modem_grp", "uart0_rts_cts_grp", "uart0_in_out_grp" 80 81"uart1": "uart1_ext_clk_grp", "uart1_dcd_dsr_grp", "uart1_ri_dtr_grp", 82 "uart1_rts_cts_grp", "uart1_in_out_grp" 83 84"uart2": "uart2_rts_cts_grp" 85 86"pwm": "pwm_0_grp", "pwm_1_grp", "pwm_2_grp", "pwm_3_grp" 87 88 89List of pins that support pinconf parameters: 90 91"qspi_wp", "qspi_hold", "qspi_cs", "qspi_sck", "uart3_sin", "uart3_sout", 92"qspi_mosi", "qspi_miso", "spi0_fss", "spi0_rxd", "spi0_txd", "spi0_sck", 93"spi1_fss", "spi1_rxd", "spi1_txd", "spi1_sck", "sdio0_data7", 94"sdio0_emmc_rst", "sdio0_led_on", "sdio0_wp", "sdio0_data3", "sdio0_data4", 95"sdio0_data5", "sdio0_data6", "sdio0_cmd", "sdio0_data0", "sdio0_data1", 96"sdio0_data2", "sdio1_led_on", "sdio1_wp", "sdio0_cd_l", "sdio0_clk", 97"sdio1_data5", "sdio1_data6", "sdio1_data7", "sdio1_emmc_rst", "sdio1_data1", 98"sdio1_data2", "sdio1_data3", "sdio1_data4", "sdio1_cd_l", "sdio1_clk", 99"sdio1_cmd", "sdio1_data0", "ext_mdio_0", "ext_mdc_0", "usb3_p1_vbus_ppc", 100"usb3_p1_overcurrent", "usb3_p0_vbus_ppc", "usb3_p0_overcurrent", 101"usb2_presence_indication", "usb2_vbus_present", "usb2_vbus_ppc", 102"usb2_overcurrent", "sata_led1", "sata_led0" 103