xref: /freebsd/sys/contrib/device-tree/Bindings/phy/ti,phy-gmii-sel.yaml (revision 0fca6ea1d4eea4c934cfff25ac9ee8ad6fe95583) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
3%YAML 1.2
4---
5$id: http://devicetree.org/schemas/phy/ti,phy-gmii-sel.yaml#
6$schema: http://devicetree.org/meta-schemas/core.yaml#
7
8title: CPSW Port's Interface Mode Selection PHY
9
10maintainers:
11  - Kishon Vijay Abraham I <kishon@ti.com>
12
13description: |
14  TI am335x/am437x/dra7(am5)/dm814x CPSW3G Ethernet Subsystem supports
15  two 10/100/1000 Ethernet ports with selectable G/MII, RMII, and RGMII interfaces.
16  The interface mode is selected by configuring the MII mode selection register(s)
17  (GMII_SEL) in the System Control Module chapter (SCM). GMII_SEL register(s) and
18  bit fields placement in SCM are different between SoCs while fields meaning
19  is the same.
20                                               +--------------+
21        +-------------------------------+      |SCM           |
22        |                     CPSW      |      |  +---------+ |
23        |        +--------------------------------+gmii_sel | |
24        |        |                      |      |  +---------+ |
25        |   +----v---+     +--------+   |      +--------------+
26        |   |Port 1..<--+-->GMII/MII<------->
27        |   |        |  |  |        |   |
28        |   +--------+  |  +--------+   |
29        |               |               |
30        |               |  +--------+   |
31        |               |  | RMII   <------->
32        |               +-->        |   |
33        |               |  +--------+   |
34        |               |               |
35        |               |  +--------+   |
36        |               |  | RGMII  <------->
37        |               +-->        |   |
38        |                  +--------+   |
39        +-------------------------------+
40
41  CPSW Port's Interface Mode Selection PHY describes MII interface mode between
42  CPSW Port and Ethernet PHY which depends on Eth PHY and board configuration.
43  |
44  CPSW Port's Interface Mode Selection PHY device should defined as child device
45  of SCM node (scm_conf) and can be attached to each CPSW port node using standard
46  PHY bindings.
47
48properties:
49  compatible:
50    enum:
51      - ti,am3352-phy-gmii-sel
52      - ti,dra7xx-phy-gmii-sel
53      - ti,am43xx-phy-gmii-sel
54      - ti,dm814-phy-gmii-sel
55      - ti,am654-phy-gmii-sel
56      - ti,j7200-cpsw5g-phy-gmii-sel
57      - ti,j721e-cpsw9g-phy-gmii-sel
58      - ti,j784s4-cpsw9g-phy-gmii-sel
59
60  reg:
61    maxItems: 1
62
63  '#phy-cells': true
64
65  ti,qsgmii-main-ports:
66    $ref: /schemas/types.yaml#/definitions/uint32-array
67    description: |
68      Required only for QSGMII mode. Array to select the port/s for QSGMII
69      main mode. The size of the array corresponds to the number of QSGMII
70      interfaces and thus, the number of distinct QSGMII main ports,
71      supported by the device. If the device supports two QSGMII interfaces
72      but only one QSGMII interface is desired, repeat the QSGMII main port
73      value corresponding to the QSGMII interface in the array.
74    minItems: 1
75    maxItems: 2
76    items:
77      minimum: 1
78      maximum: 8
79
80allOf:
81  - if:
82      properties:
83        compatible:
84          contains:
85            enum:
86              - ti,dra7xx-phy-gmii-sel
87              - ti,dm814-phy-gmii-sel
88              - ti,am654-phy-gmii-sel
89              - ti,j7200-cpsw5g-phy-gmii-sel
90              - ti,j721e-cpsw9g-phy-gmii-sel
91              - ti,j784s4-cpsw9g-phy-gmii-sel
92    then:
93      properties:
94        '#phy-cells':
95          const: 1
96          description: CPSW port number (starting from 1)
97
98  - if:
99      properties:
100        compatible:
101          contains:
102            enum:
103              - ti,j7200-cpsw5g-phy-gmii-sel
104    then:
105      properties:
106        ti,qsgmii-main-ports:
107          maxItems: 1
108          items:
109            minimum: 1
110            maximum: 4
111
112  - if:
113      properties:
114        compatible:
115          contains:
116            enum:
117              - ti,j721e-cpsw9g-phy-gmii-sel
118              - ti,j784s4-cpsw9g-phy-gmii-sel
119    then:
120      properties:
121        ti,qsgmii-main-ports:
122          minItems: 2
123          maxItems: 2
124          items:
125            minimum: 1
126            maximum: 8
127
128  - if:
129      not:
130        properties:
131          compatible:
132            contains:
133              enum:
134                - ti,j7200-cpsw5g-phy-gmii-sel
135                - ti,j721e-cpsw9g-phy-gmii-sel
136                - ti,j784s4-cpsw9g-phy-gmii-sel
137    then:
138      properties:
139        ti,qsgmii-main-ports: false
140
141  - if:
142      properties:
143        compatible:
144          contains:
145            enum:
146              - ti,am3352-phy-gmii-sel
147              - ti,am43xx-phy-gmii-sel
148    then:
149      properties:
150        '#phy-cells':
151          const: 2
152          description: |
153            - CPSW port number (starting from 1)
154            - RMII refclk mode
155
156required:
157  - compatible
158  - reg
159  - '#phy-cells'
160
161additionalProperties: false
162
163examples:
164  - |
165    phy_gmii_sel: phy@650 {
166        compatible = "ti,am3352-phy-gmii-sel";
167        reg = <0x650 0x4>;
168        #phy-cells = <2>;
169    };
170