xref: /freebsd/sys/contrib/device-tree/Bindings/phy/renesas,usb2-phy.yaml (revision 6ba2210ee039f2f12878c217bcf058e9c8b26b29) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/phy/renesas,usb2-phy.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Renesas R-Car generation 3 USB 2.0 PHY
8
9maintainers:
10  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
11
12properties:
13  compatible:
14    oneOf:
15      - items:
16          - const: renesas,usb2-phy-r8a77470 # RZ/G1C
17
18      - items:
19          - enum:
20              - renesas,usb2-phy-r7s9210  # RZ/A2
21              - renesas,usb2-phy-r8a774a1 # RZ/G2M
22              - renesas,usb2-phy-r8a774b1 # RZ/G2N
23              - renesas,usb2-phy-r8a774c0 # RZ/G2E
24              - renesas,usb2-phy-r8a774e1 # RZ/G2H
25              - renesas,usb2-phy-r8a7795  # R-Car H3
26              - renesas,usb2-phy-r8a7796  # R-Car M3-W
27              - renesas,usb2-phy-r8a77961 # R-Car M3-W+
28              - renesas,usb2-phy-r8a77965 # R-Car M3-N
29              - renesas,usb2-phy-r8a77990 # R-Car E3
30              - renesas,usb2-phy-r8a77995 # R-Car D3
31          - const: renesas,rcar-gen3-usb2-phy
32
33  reg:
34    maxItems: 1
35
36  clocks:
37    minItems: 1
38    maxItems: 2
39
40  clock-names:
41    minItems: 1
42    maxItems: 2
43    items:
44      - const: fck
45      - const: usb_x1
46
47  '#phy-cells':
48    enum: [0, 1]  # and 0 is deprecated.
49    description: |
50      The phandle's argument in the PHY specifier is the INT_STATUS bit of
51      controller.
52      - 1 = USBH_INTA (OHCI)
53      - 2 = USBH_INTB (EHCI)
54      - 3 = UCOM_INT (OTG and BC)
55
56  interrupts:
57    maxItems: 1
58
59  power-domains:
60    maxItems: 1
61
62  resets:
63    minItems: 1
64    maxItems: 2
65    items:
66      - description: reset of USB 2.0 host side
67      - description: reset of USB 2.0 peripheral side
68
69  vbus-supply:
70    description: |
71      Phandle to a regulator that provides power to the VBUS. This regulator
72      will be managed during the PHY power on/off sequence.
73
74  renesas,no-otg-pins:
75    $ref: /schemas/types.yaml#/definitions/flag
76    description: |
77      specify when a board does not provide proper otg pins.
78
79  dr_mode: true
80
81if:
82  properties:
83    compatible:
84      contains:
85        const: renesas,usb2-phy-r7s9210
86then:
87  required:
88    - clock-names
89
90required:
91  - compatible
92  - reg
93  - clocks
94  - '#phy-cells'
95
96additionalProperties: false
97
98examples:
99  - |
100    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
101    #include <dt-bindings/interrupt-controller/arm-gic.h>
102    #include <dt-bindings/power/r8a7795-sysc.h>
103
104    usb-phy@ee080200 {
105        compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
106        reg = <0xee080200 0x700>;
107        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
108        clocks = <&cpg CPG_MOD 703>;
109        #phy-cells = <1>;
110    };
111
112    usb-phy@ee0a0200 {
113        compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
114        reg = <0xee0a0200 0x700>;
115        clocks = <&cpg CPG_MOD 702>;
116        #phy-cells = <1>;
117    };
118