xref: /freebsd/sys/contrib/device-tree/Bindings/phy/renesas,usb2-phy.yaml (revision 5ca8e32633c4ffbbcd6762e5888b6a4ba0708c6c) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/phy/renesas,usb2-phy.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Renesas R-Car generation 3 USB 2.0 PHY
8
9maintainers:
10  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
11
12properties:
13  compatible:
14    oneOf:
15      - items:
16          - const: renesas,usb2-phy-r8a77470 # RZ/G1C
17
18      - items:
19          - enum:
20              - renesas,usb2-phy-r7s9210  # RZ/A2
21              - renesas,usb2-phy-r8a774a1 # RZ/G2M
22              - renesas,usb2-phy-r8a774b1 # RZ/G2N
23              - renesas,usb2-phy-r8a774c0 # RZ/G2E
24              - renesas,usb2-phy-r8a774e1 # RZ/G2H
25              - renesas,usb2-phy-r8a7795  # R-Car H3
26              - renesas,usb2-phy-r8a7796  # R-Car M3-W
27              - renesas,usb2-phy-r8a77961 # R-Car M3-W+
28              - renesas,usb2-phy-r8a77965 # R-Car M3-N
29              - renesas,usb2-phy-r8a77990 # R-Car E3
30              - renesas,usb2-phy-r8a77995 # R-Car D3
31          - const: renesas,rcar-gen3-usb2-phy
32
33      - items:
34          - enum:
35              - renesas,usb2-phy-r9a07g043 # RZ/G2UL
36              - renesas,usb2-phy-r9a07g044 # RZ/G2{L,LC}
37              - renesas,usb2-phy-r9a07g054 # RZ/V2L
38          - const: renesas,rzg2l-usb2-phy
39
40  reg:
41    maxItems: 1
42
43  clocks:
44    minItems: 1
45    maxItems: 2
46
47  clock-names:
48    minItems: 1
49    items:
50      - const: fck
51      - const: usb_x1
52
53  '#phy-cells':
54    enum: [0, 1]  # and 0 is deprecated.
55    description: |
56      The phandle's argument in the PHY specifier is the INT_STATUS bit of
57      controller.
58      - 1 = USBH_INTA (OHCI)
59      - 2 = USBH_INTB (EHCI)
60      - 3 = UCOM_INT (OTG and BC)
61
62  interrupts:
63    maxItems: 1
64
65  power-domains:
66    maxItems: 1
67
68  resets:
69    minItems: 1
70    items:
71      - description: reset of USB 2.0 host side
72      - description: reset of USB 2.0 peripheral side
73
74  vbus-supply:
75    description: |
76      Phandle to a regulator that provides power to the VBUS. This regulator
77      will be managed during the PHY power on/off sequence.
78
79  renesas,no-otg-pins:
80    $ref: /schemas/types.yaml#/definitions/flag
81    description: |
82      specify when a board does not provide proper otg pins.
83
84  dr_mode: true
85
86if:
87  properties:
88    compatible:
89      contains:
90        const: renesas,usb2-phy-r7s9210
91then:
92  required:
93    - clock-names
94
95required:
96  - compatible
97  - reg
98  - clocks
99  - '#phy-cells'
100
101allOf:
102  - if:
103      properties:
104        compatible:
105          contains:
106            const: renesas,rzg2l-usb2-phy
107    then:
108      required:
109        - resets
110
111additionalProperties: false
112
113examples:
114  - |
115    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
116    #include <dt-bindings/interrupt-controller/arm-gic.h>
117    #include <dt-bindings/power/r8a7795-sysc.h>
118
119    usb-phy@ee080200 {
120        compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
121        reg = <0xee080200 0x700>;
122        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
123        clocks = <&cpg CPG_MOD 703>;
124        #phy-cells = <1>;
125    };
126
127    usb-phy@ee0a0200 {
128        compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
129        reg = <0xee0a0200 0x700>;
130        clocks = <&cpg CPG_MOD 702>;
131        #phy-cells = <1>;
132    };
133