xref: /freebsd/sys/contrib/device-tree/Bindings/phy/realtek,usb3phy.yaml (revision aa1a8ff2d6dbc51ef058f46f3db5a8bb77967145)

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2023 Realtek Semiconductor Corporation
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/realtek,usb3phy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Realtek DHC SoCs USB 3.0 PHY

maintainers:
  - Stanley Chang <stanley_chang@realtek.com>

description: |
  Realtek USB 3.0 PHY support the digital home center (DHC) RTD series SoCs.
  The USB 3.0 PHY driver is designed to support the XHCI controller. The SoCs
  support multiple XHCI controllers. One PHY device node maps to one XHCI
  controller.

  RTD1295/RTD1619 SoCs USB
  The USB architecture includes three XHCI controllers.
  Each XHCI maps to one USB 2.0 PHY and map one USB 3.0 PHY on some
  controllers.
  XHCI controller#0 -- usb2phy -- phy#0
                    |- usb3phy -- phy#0
  XHCI controller#1 -- usb2phy -- phy#0
  XHCI controller#2 -- usb2phy -- phy#0
                    |- usb3phy -- phy#0

  RTD1319/RTD1619b SoCs USB
  The USB architecture includes three XHCI controllers.
  Each XHCI maps to one USB 2.0 PHY and map one USB 3.0 PHY on controllers#2.
  XHCI controller#0 -- usb2phy -- phy#0
  XHCI controller#1 -- usb2phy -- phy#0
  XHCI controller#2 -- usb2phy -- phy#0
                    |- usb3phy -- phy#0

  RTD1319d SoCs USB
  The USB architecture includes three XHCI controllers.
  Each xhci maps to one USB 2.0 PHY and map one USB 3.0 PHY on controllers#0.
  XHCI controller#0 -- usb2phy -- phy#0
                    |- usb3phy -- phy#0
  XHCI controller#1 -- usb2phy -- phy#0
  XHCI controller#2 -- usb2phy -- phy#0

properties:
  compatible:
    enum:
      - realtek,rtd1295-usb3phy
      - realtek,rtd1319-usb3phy
      - realtek,rtd1319d-usb3phy
      - realtek,rtd1619-usb3phy
      - realtek,rtd1619b-usb3phy

  reg:
    maxItems: 1

  "#phy-cells":
    const: 0

  nvmem-cells:
    maxItems: 1
    description: A phandle to the tx lfps swing trim data provided by
      a nvmem device, if unspecified, default values shall be used.

  nvmem-cell-names:
    items:
      - const: usb_u3_tx_lfps_swing_trim

  realtek,amplitude-control-coarse-tuning:
    description:
      This adjusts the signal amplitude for normal operation and beacon LFPS.
      This value is a parameter for coarse tuning.
      For different boards, if the default value is inappropriate, this
      property can be assigned to adjust.
    $ref: /schemas/types.yaml#/definitions/uint32
    default: 255
    minimum: 0
    maximum: 255

  realtek,amplitude-control-fine-tuning:
    description:
      This adjusts the signal amplitude for normal operation and beacon LFPS.
      This value is used for fine-tuning parameters.
    $ref: /schemas/types.yaml#/definitions/uint32
    default: 65535
    minimum: 0
    maximum: 65535

required:
  - compatible
  - reg
  - "#phy-cells"

additionalProperties: false

examples:
  - |
    usb-phy@13e10 {
        compatible = "realtek,rtd1319d-usb3phy";
        reg = <0x13e10 0x4>;
        #phy-cells = <0>;

        nvmem-cells = <&otp_usb_u3_tx_lfps_swing_trim>;
        nvmem-cell-names = "usb_u3_tx_lfps_swing_trim";

        realtek,amplitude-control-coarse-tuning = <0x77>;
    };