1* Marvell PXA1928 USB and HSIC PHYs 2 3Required properties: 4- compatible: "marvell,pxa1928-usb-phy" or "marvell,pxa1928-hsic-phy" 5- reg: base address and length of the registers 6- clocks - A single clock. From common clock binding. 7- #phys-cells: should be 0. From commmon phy binding. 8- resets: reference to the reset controller 9 10Example: 11 12 usbphy: phy@7000 { 13 compatible = "marvell,pxa1928-usb-phy"; 14 reg = <0x7000 0xe0>; 15 clocks = <&apmu_clocks PXA1928_CLK_USB>; 16 #phy-cells = <0>; 17 }; 18 19