xref: /freebsd/sys/contrib/device-tree/Bindings/phy/mediatek,xsphy.yaml (revision 3e8eb5c7f4909209c042403ddee340b2ee7003a5) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2# Copyright (c) 2020 MediaTek
3%YAML 1.2
4---
5$id: http://devicetree.org/schemas/phy/mediatek,xsphy.yaml#
6$schema: http://devicetree.org/meta-schemas/core.yaml#
7
8title: MediaTek XS-PHY Controller Device Tree Bindings
9
10maintainers:
11  - Chunfeng Yun <chunfeng.yun@mediatek.com>
12
13description: |
14  The XS-PHY controller supports physical layer functionality for USB3.1
15  GEN2 controller on MediaTek SoCs.
16
17  Banks layout of xsphy
18  ----------------------------------
19  port        offset    bank
20  u2 port0    0x0000    MISC
21              0x0100    FMREG
22              0x0300    U2PHY_COM
23  u2 port1    0x1000    MISC
24              0x1100    FMREG
25              0x1300    U2PHY_COM
26  u2 port2    0x2000    MISC
27              ...
28  u31 common  0x3000    DIG_GLB
29              0x3100    PHYA_GLB
30  u31 port0   0x3400    DIG_LN_TOP
31              0x3500    DIG_LN_TX0
32              0x3600    DIG_LN_RX0
33              0x3700    DIG_LN_DAIF
34              0x3800    PHYA_LN
35  u31 port1   0x3a00    DIG_LN_TOP
36              0x3b00    DIG_LN_TX0
37              0x3c00    DIG_LN_RX0
38              0x3d00    DIG_LN_DAIF
39              0x3e00    PHYA_LN
40              ...
41  DIG_GLB & PHYA_GLB are shared by U31 ports.
42
43properties:
44  $nodename:
45    pattern: "^xs-phy@[0-9a-f]+$"
46
47  compatible:
48    items:
49      - enum:
50          - mediatek,mt3611-xsphy
51          - mediatek,mt3612-xsphy
52      - const: mediatek,xsphy
53
54  reg:
55    description:
56      Register shared by multiple U3 ports, exclude port's private register,
57      if only U2 ports provided, shouldn't use the property.
58    maxItems: 1
59
60  "#address-cells":
61    enum: [1, 2]
62
63  "#size-cells":
64    enum: [1, 2]
65
66  ranges: true
67
68  mediatek,src-ref-clk-mhz:
69    description:
70      Frequency of reference clock for slew rate calibrate
71    default: 26
72
73  mediatek,src-coef:
74    description:
75      Coefficient for slew rate calibrate, depends on SoC process
76    $ref: /schemas/types.yaml#/definitions/uint32
77    default: 17
78
79# Required child node:
80patternProperties:
81  "^usb-phy@[0-9a-f]+$":
82    type: object
83    description:
84      A sub-node is required for each port the controller provides.
85      Address range information including the usual 'reg' property
86      is used inside these nodes to describe the controller's topology.
87
88    properties:
89      reg:
90        maxItems: 1
91
92      clocks:
93        items:
94          - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz)
95
96      clock-names:
97        items:
98          - const: ref
99
100      "#phy-cells":
101        const: 1
102        description: |
103          The cells contain the following arguments.
104
105          - description: The PHY type
106              enum:
107                - PHY_TYPE_USB2
108                - PHY_TYPE_USB3
109
110      # The following optional vendor properties are only for debug or HQA test
111      mediatek,eye-src:
112        description:
113          The value of slew rate calibrate (U2 phy)
114        $ref: /schemas/types.yaml#/definitions/uint32
115        minimum: 1
116        maximum: 7
117
118      mediatek,eye-vrt:
119        description:
120          The selection of VRT reference voltage (U2 phy)
121        $ref: /schemas/types.yaml#/definitions/uint32
122        minimum: 1
123        maximum: 7
124
125      mediatek,eye-term:
126        description:
127          The selection of HS_TX TERM reference voltage (U2 phy)
128        $ref: /schemas/types.yaml#/definitions/uint32
129        minimum: 1
130        maximum: 7
131
132      mediatek,efuse-intr:
133        description:
134          The selection of Internal Resistor (U2/U3 phy)
135        $ref: /schemas/types.yaml#/definitions/uint32
136        minimum: 1
137        maximum: 63
138
139      mediatek,efuse-tx-imp:
140        description:
141          The selection of TX Impedance (U3 phy)
142        $ref: /schemas/types.yaml#/definitions/uint32
143        minimum: 1
144        maximum: 31
145
146      mediatek,efuse-rx-imp:
147        description:
148          The selection of RX Impedance (U3 phy)
149        $ref: /schemas/types.yaml#/definitions/uint32
150        minimum: 1
151        maximum: 31
152
153    required:
154      - reg
155      - clocks
156      - clock-names
157      - "#phy-cells"
158
159    additionalProperties: false
160
161required:
162  - compatible
163  - "#address-cells"
164  - "#size-cells"
165  - ranges
166
167additionalProperties: false
168
169examples:
170  - |
171    #include <dt-bindings/phy/phy.h>
172
173    u3phy: xs-phy@11c40000 {
174        compatible = "mediatek,mt3611-xsphy", "mediatek,xsphy";
175        reg = <0x11c43000 0x0200>;
176        mediatek,src-ref-clk-mhz = <26>;
177        mediatek,src-coef = <17>;
178        #address-cells = <1>;
179        #size-cells = <1>;
180        ranges;
181
182        u2port0: usb-phy@11c40000 {
183            reg = <0x11c40000 0x0400>;
184            clocks = <&clk48m>;
185            clock-names = "ref";
186            mediatek,eye-src = <4>;
187            #phy-cells = <1>;
188        };
189
190        u3port0: usb-phy@11c43000 {
191            reg = <0x11c43400 0x0500>;
192            clocks = <&clk26m>;
193            clock-names = "ref";
194            mediatek,efuse-intr = <28>;
195            #phy-cells = <1>;
196        };
197    };
198
199...
200