xref: /freebsd/sys/contrib/device-tree/Bindings/phy/allwinner,sun5i-a13-usb-phy.yaml (revision 924226fba12cc9a228c73b956e1b7fa24c60b055) 
1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/phy/allwinner,sun5i-a13-usb-phy.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Allwinner A13 USB PHY Device Tree Bindings
8
9maintainers:
10  - Chen-Yu Tsai <wens@csie.org>
11  - Maxime Ripard <mripard@kernel.org>
12
13properties:
14  "#phy-cells":
15    const: 1
16
17  compatible:
18    const: allwinner,sun5i-a13-usb-phy
19
20  reg:
21    items:
22      - description: PHY Control registers
23      - description: PHY PMU1 registers
24
25  reg-names:
26    items:
27      - const: phy_ctrl
28      - const: pmu1
29
30  clocks:
31    maxItems: 1
32    description: USB OTG PHY bus clock
33
34  clock-names:
35    const: usb_phy
36
37  resets:
38    items:
39      - description: USB OTG reset
40      - description: USB Host 1 Controller reset
41
42  reset-names:
43    items:
44      - const: usb0_reset
45      - const: usb1_reset
46
47  usb0_id_det-gpios:
48    maxItems: 1
49    description: GPIO to the USB OTG ID pin
50
51  usb0_vbus_det-gpios:
52    maxItems: 1
53    description: GPIO to the USB OTG VBUS detect pin
54
55  usb0_vbus_power-supply:
56    description: Power supply to detect the USB OTG VBUS
57
58  usb0_vbus-supply:
59    description: Regulator controlling USB OTG VBUS
60
61  usb1_vbus-supply:
62    description: Regulator controlling USB1 Host controller
63
64required:
65  - "#phy-cells"
66  - compatible
67  - clocks
68  - clock-names
69  - reg
70  - reg-names
71  - resets
72  - reset-names
73
74additionalProperties: false
75
76examples:
77  - |
78    #include <dt-bindings/gpio/gpio.h>
79    #include <dt-bindings/clock/sun5i-ccu.h>
80    #include <dt-bindings/reset/sun5i-ccu.h>
81
82    phy@1c13400 {
83        #phy-cells = <1>;
84        compatible = "allwinner,sun5i-a13-usb-phy";
85        reg = <0x01c13400 0x10>, <0x01c14800 0x4>;
86        reg-names = "phy_ctrl", "pmu1";
87        clocks = <&ccu CLK_USB_PHY0>;
88        clock-names = "usb_phy";
89        resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>;
90        reset-names = "usb0_reset", "usb1_reset";
91        usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
92        usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
93        usb0_vbus-supply = <&reg_usb0_vbus>;
94        usb1_vbus-supply = <&reg_usb1_vbus>;
95    };
96