1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: "http://devicetree.org/schemas/pci/intel,keembay-pcie.yaml#" 5$schema: "http://devicetree.org/meta-schemas/core.yaml#" 6 7title: Intel Keem Bay PCIe controller Root Complex mode 8 9maintainers: 10 - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> 11 - Srikanth Thokala <srikanth.thokala@intel.com> 12 13allOf: 14 - $ref: /schemas/pci/pci-bus.yaml# 15 16properties: 17 compatible: 18 const: intel,keembay-pcie 19 20 ranges: 21 maxItems: 1 22 23 reset-gpios: 24 maxItems: 1 25 26 reg: 27 maxItems: 4 28 29 reg-names: 30 items: 31 - const: dbi 32 - const: atu 33 - const: config 34 - const: apb 35 36 clocks: 37 maxItems: 2 38 39 clock-names: 40 items: 41 - const: master 42 - const: aux 43 44 interrupts: 45 maxItems: 3 46 47 interrupt-names: 48 items: 49 - const: pcie 50 - const: pcie_ev 51 - const: pcie_err 52 53 num-lanes: 54 description: Number of lanes to use. 55 enum: [ 1, 2 ] 56 57required: 58 - compatible 59 - reg 60 - reg-names 61 - ranges 62 - clocks 63 - clock-names 64 - interrupts 65 - interrupt-names 66 - reset-gpios 67 68unevaluatedProperties: false 69 70examples: 71 - | 72 #include <dt-bindings/interrupt-controller/arm-gic.h> 73 #include <dt-bindings/interrupt-controller/irq.h> 74 #include <dt-bindings/gpio/gpio.h> 75 #define KEEM_BAY_A53_PCIE 76 #define KEEM_BAY_A53_AUX_PCIE 77 pcie@37000000 { 78 compatible = "intel,keembay-pcie"; 79 reg = <0x37000000 0x00001000>, 80 <0x37300000 0x00001000>, 81 <0x36e00000 0x00200000>, 82 <0x37800000 0x00000200>; 83 reg-names = "dbi", "atu", "config", "apb"; 84 #address-cells = <3>; 85 #size-cells = <2>; 86 device_type = "pci"; 87 ranges = <0x02000000 0 0x36000000 0x36000000 0 0x00e00000>; 88 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, 89 <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, 90 <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; 91 interrupt-names = "pcie", "pcie_ev", "pcie_err"; 92 clocks = <&scmi_clk KEEM_BAY_A53_PCIE>, 93 <&scmi_clk KEEM_BAY_A53_AUX_PCIE>; 94 clock-names = "master", "aux"; 95 reset-gpios = <&pca2 9 GPIO_ACTIVE_LOW>; 96 num-lanes = <2>; 97 }; 98