xref: /freebsd/sys/contrib/device-tree/Bindings/net/wireless/mediatek,mt76.yaml (revision af23369a6deaaeb612ab266eb88b8bb8d560c322)
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
3
4%YAML 1.2
5---
6$id: http://devicetree.org/schemas/net/wireless/mediatek,mt76.yaml#
7$schema: http://devicetree.org/meta-schemas/core.yaml#
8
9title: MediaTek mt76 wireless devices Generic Binding
10
11maintainers:
12  - Felix Fietkau <nbd@nbd.name>
13  - Lorenzo Bianconi <lorenzo@kernel.org>
14  - Ryder Lee <ryder.lee@mediatek.com>
15
16description: |
17  This node provides properties for configuring the MediaTek mt76xx
18  wireless device. The node is expected to be specified as a child
19  node of the PCI controller to which the wireless chip is connected.
20  Alternatively, it can specify the wireless part of the MT7628/MT7688
21  or MT7622/MT7986 SoC.
22
23allOf:
24  - $ref: ieee80211.yaml#
25
26properties:
27  compatible:
28    enum:
29      - mediatek,mt76
30      - mediatek,mt7628-wmac
31      - mediatek,mt7622-wmac
32      - mediatek,mt7986-wmac
33
34  reg:
35    minItems: 1
36    maxItems: 3
37    description:
38      MT7986 should contain 3 regions consys, dcm, and sku, in this order.
39
40  interrupts:
41    maxItems: 1
42
43  power-domains:
44    maxItems: 1
45
46  memory-region:
47    maxItems: 1
48
49  resets:
50    maxItems: 1
51    description:
52      Specify the consys reset for mt7986.
53
54  reset-names:
55    const: consys
56
57  clocks:
58    maxItems: 2
59    description:
60      Specify the consys clocks for mt7986.
61
62  clock-names:
63    items:
64      - const: mcu
65      - const: ap2conn
66
67  mediatek,infracfg:
68    $ref: /schemas/types.yaml#/definitions/phandle
69    description:
70      Phandle to the infrastructure bus fabric syscon node.
71      This property is MT7622 specific
72
73  ieee80211-freq-limit: true
74
75  mediatek,eeprom-data:
76    $ref: /schemas/types.yaml#/definitions/uint32-array
77    description:
78      EEPROM data embedded as array.
79
80  mediatek,mtd-eeprom:
81    $ref: /schemas/types.yaml#/definitions/phandle-array
82    items:
83      - items:
84          - description: phandle to MTD partition
85          - description: offset containing EEPROM data
86    description:
87      Phandle to a MTD partition + offset containing EEPROM data
88
89  big-endian:
90    $ref: /schemas/types.yaml#/definitions/flag
91    description:
92      Specify if the radio eeprom partition is written in big-endian
93
94  mediatek,eeprom-merge-otp:
95    type: boolean
96    description:
97      Merge EEPROM data with OTP data. Can be used on boards where the flash
98      calibration data is generic and specific calibration data should be
99      pulled from the OTP ROM
100
101  mediatek,disable-radar-background:
102    type: boolean
103    description:
104      Disable/enable radar/CAC detection running on a dedicated offchannel
105      chain available on some hw.
106      Background radar/CAC detection allows to avoid the CAC downtime
107      switching on a different channel during CAC detection on the selected
108      radar channel.
109
110  led:
111    type: object
112    $ref: /schemas/leds/common.yaml#
113    additionalProperties: false
114    properties:
115      led-sources:
116        maxItems: 1
117
118  power-limits:
119    type: object
120    additionalProperties: false
121    patternProperties:
122      "^r[0-9]+":
123        type: object
124        additionalProperties: false
125        properties:
126          regdomain:
127            $ref: /schemas/types.yaml#/definitions/string
128            description:
129              Regdomain refers to a legal regulatory region. Different
130              countries define different levels of allowable transmitter
131              power, time that a channel can be occupied, and different
132              available channels
133            enum:
134              - FCC
135              - ETSI
136              - JP
137
138        patternProperties:
139          "^txpower-[256]g$":
140            type: object
141            additionalProperties: false
142            patternProperties:
143              "^b[0-9]+$":
144                type: object
145                additionalProperties: false
146                properties:
147                  channels:
148                    $ref: /schemas/types.yaml#/definitions/uint32-array
149                    minItems: 2
150                    maxItems: 2
151                    description:
152                      Pairs of first and last channel number of the selected
153                      band
154
155                  rates-cck:
156                    $ref: /schemas/types.yaml#/definitions/uint8-array
157                    minItems: 4
158                    maxItems: 4
159                    description:
160                      4 half-dBm per-rate power limit values
161
162                  rates-ofdm:
163                    $ref: /schemas/types.yaml#/definitions/uint8-array
164                    minItems: 8
165                    maxItems: 8
166                    description:
167                      8 half-dBm per-rate power limit values
168
169                  rates-mcs:
170                    $ref: /schemas/types.yaml#/definitions/uint8-matrix
171                    description:
172                      Sets of per-rate power limit values for 802.11n/802.11ac
173                      rates for multiple channel bandwidth settings.
174                      Each set starts with the number of channel bandwidth
175                      settings for which the rate set applies, followed by
176                      either 8 or 10 power limit values. The order of the
177                      channel bandwidth settings is 20, 40, 80 and 160 MHz.
178                    maxItems: 4
179                    items:
180                      minItems: 9
181                      maxItems: 11
182
183                  rates-ru:
184                    $ref: /schemas/types.yaml#/definitions/uint8-matrix
185                    description:
186                      Sets of per-rate power limit values for 802.11ax rates
187                      for multiple channel bandwidth or resource unit settings.
188                      Each set starts with the number of channel bandwidth or
189                      resource unit settings for which the rate set applies,
190                      followed by 12 power limit values. The order of the
191                      channel resource unit settings is RU26, RU52, RU106,
192                      RU242/SU20, RU484/SU40, RU996/SU80 and RU2x996/SU160.
193                    items:
194                      minItems: 13
195                      maxItems: 13
196
197                  txs-delta:
198                    $ref: /schemas/types.yaml#/definitions/uint32-array
199                    description:
200                      Half-dBm power delta for different numbers of antennas
201
202required:
203  - compatible
204  - reg
205
206unevaluatedProperties: false
207
208examples:
209  - |
210    pcie0 {
211      #address-cells = <3>;
212      #size-cells = <2>;
213      wifi@0,0 {
214        compatible = "mediatek,mt76";
215        reg = <0x0000 0 0 0 0>;
216        ieee80211-freq-limit = <5000000 6000000>;
217        mediatek,mtd-eeprom = <&factory 0x8000>;
218        big-endian;
219
220        led {
221          led-sources = <2>;
222        };
223
224        power-limits {
225          r0 {
226            regdomain = "FCC";
227            txpower-5g {
228               b0 {
229                   channels = <36 48>;
230                   rates-ofdm = /bits/ 8 <23 23 23 23 23 23 23 23>;
231                   rates-mcs = /bits/ 8 <1 23 23 23 23 23 23 23 23 23 23>,
232                               /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22>;
233                   rates-ru = /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22 22 22>,
234                              /bits/ 8 <4 20 20 20 20 20 20 20 20 20 20 20 20>;
235               };
236               b1 {
237                   channels = <100 181>;
238                   rates-ofdm = /bits/ 8 <14 14 14 14 14 14 14 14>;
239                   rates-mcs = /bits/ 8  <4 14 14 14 14 14 14 14 14 14 14>;
240                   txs-delta = <12 9 6>;
241                   rates-ru = /bits/ 8  <7 14 14 14 14 14 14 14 14 14 14 14 14>;
242               };
243             };
244          };
245        };
246      };
247    };
248
249  - |
250    wifi@10300000 {
251      compatible = "mediatek,mt7628-wmac";
252      reg = <0x10300000 0x100000>;
253
254      interrupt-parent = <&cpuintc>;
255      interrupts = <6>;
256
257      mediatek,mtd-eeprom = <&factory 0x0>;
258    };
259
260  - |
261    #include <dt-bindings/interrupt-controller/arm-gic.h>
262    #include <dt-bindings/interrupt-controller/irq.h>
263    wifi@18000000 {
264      compatible = "mediatek,mt7622-wmac";
265      reg = <0x10300000 0x100000>;
266      interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>;
267
268      mediatek,infracfg = <&infracfg>;
269
270      power-domains = <&scpsys 3>;
271    };
272
273  - |
274    wifi@18000000 {
275        compatible = "mediatek,mt7986-wmac";
276        resets = <&watchdog 23>;
277        reset-names = "consys";
278        reg = <0x18000000 0x1000000>,
279              <0x10003000 0x1000>,
280              <0x11d10000 0x1000>;
281        interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
282        clocks = <&topckgen 50>,
283                 <&topckgen 62>;
284        clock-names = "mcu", "ap2conn";
285        memory-region = <&wmcpu_emi>;
286    };
287