1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 2# Copyright 2019 BayLibre, SAS 3%YAML 1.2 4--- 5$id: http://devicetree.org/schemas/net/stm32-dwmac.yaml# 6$schema: http://devicetree.org/meta-schemas/core.yaml# 7 8title: STMicroelectronics STM32 / MCU DWMAC glue layer controller 9 10maintainers: 11 - Alexandre Torgue <alexandre.torgue@foss.st.com> 12 - Christophe Roullier <christophe.roullier@foss.st.com> 13 14description: 15 This file documents platform glue layer for stmmac. 16 17# We need a select here so we don't match all nodes with 'snps,dwmac' 18select: 19 properties: 20 compatible: 21 contains: 22 enum: 23 - st,stm32-dwmac 24 - st,stm32mp1-dwmac 25 required: 26 - compatible 27 28allOf: 29 - $ref: snps,dwmac.yaml# 30 31properties: 32 compatible: 33 oneOf: 34 - items: 35 - enum: 36 - st,stm32mp1-dwmac 37 - const: snps,dwmac-4.20a 38 - items: 39 - enum: 40 - st,stm32-dwmac 41 - const: snps,dwmac-4.10a 42 - items: 43 - enum: 44 - st,stm32-dwmac 45 - const: snps,dwmac-3.50a 46 47 reg: true 48 49 reg-names: 50 items: 51 - const: stmmaceth 52 53 clocks: 54 minItems: 3 55 items: 56 - description: GMAC main clock 57 - description: MAC TX clock 58 - description: MAC RX clock 59 - description: For MPU family, used for power mode 60 - description: For MPU family, used for PHY without quartz 61 - description: PTP clock 62 63 clock-names: 64 minItems: 3 65 maxItems: 6 66 contains: 67 enum: 68 - stmmaceth 69 - mac-clk-tx 70 - mac-clk-rx 71 - ethstp 72 - eth-ck 73 - ptp_ref 74 75 st,syscon: 76 $ref: /schemas/types.yaml#/definitions/phandle-array 77 items: 78 - items: 79 - description: phandle to the syscon node which encompases the glue register 80 - description: offset of the control register 81 description: 82 Should be phandle/offset pair. The phandle to the syscon node which 83 encompases the glue register, and the offset of the control register 84 85 st,eth-clk-sel: 86 description: 87 set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125. 88 type: boolean 89 90 st,eth-ref-clk-sel: 91 description: 92 set this property in RMII mode when you have PHY without crystal 50MHz and want to 93 select RCC clock instead of ETH_REF_CLK. 94 type: boolean 95 96required: 97 - compatible 98 - clocks 99 - clock-names 100 - st,syscon 101 102unevaluatedProperties: false 103 104examples: 105 - | 106 #include <dt-bindings/interrupt-controller/arm-gic.h> 107 #include <dt-bindings/clock/stm32mp1-clks.h> 108 #include <dt-bindings/reset/stm32mp1-resets.h> 109 #include <dt-bindings/mfd/stm32h7-rcc.h> 110 //Example 1 111 ethernet0: ethernet@5800a000 { 112 compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a"; 113 reg = <0x5800a000 0x2000>; 114 reg-names = "stmmaceth"; 115 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; 116 interrupt-names = "macirq"; 117 clock-names = "stmmaceth", 118 "mac-clk-tx", 119 "mac-clk-rx", 120 "ethstp", 121 "eth-ck"; 122 clocks = <&rcc ETHMAC>, 123 <&rcc ETHTX>, 124 <&rcc ETHRX>, 125 <&rcc ETHSTP>, 126 <&rcc ETHCK_K>; 127 st,syscon = <&syscfg 0x4>; 128 snps,pbl = <2>; 129 snps,axi-config = <&stmmac_axi_config_0>; 130 snps,tso; 131 phy-mode = "rgmii"; 132 }; 133 134 - | 135 //Example 2 (MCU example) 136 ethernet1: ethernet@40028000 { 137 compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; 138 reg = <0x40028000 0x8000>; 139 reg-names = "stmmaceth"; 140 interrupts = <0 61 0>, <0 62 0>; 141 interrupt-names = "macirq", "eth_wake_irq"; 142 clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; 143 clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; 144 st,syscon = <&syscfg 0x4>; 145 snps,pbl = <8>; 146 snps,mixed-burst; 147 phy-mode = "mii"; 148 }; 149 150 - | 151 //Example 3 152 ethernet2: ethernet@40027000 { 153 compatible = "st,stm32-dwmac", "snps,dwmac-4.10a"; 154 reg = <0x40028000 0x8000>; 155 reg-names = "stmmaceth"; 156 interrupts = <61>; 157 interrupt-names = "macirq"; 158 clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; 159 clocks = <&rcc 62>, <&rcc 61>, <&rcc 60>; 160 st,syscon = <&syscfg 0x4>; 161 snps,pbl = <8>; 162 phy-mode = "mii"; 163 }; 164