1Qualcomm Technologies EMAC Gigabit Ethernet Controller 2 3This network controller consists of two devices: a MAC and an SGMII 4internal PHY. Each device is represented by a device tree node. A phandle 5connects the MAC node to its corresponding internal phy node. Another 6phandle points to the external PHY node. 7 8Required properties: 9 10MAC node: 11- compatible : Should be "qcom,fsm9900-emac". 12- reg : Offset and length of the register regions for the device 13- interrupts : Interrupt number used by this controller 14- mac-address : The 6-byte MAC address. If present, it is the default 15 MAC address. 16- internal-phy : phandle to the internal PHY node 17- phy-handle : phandle to the external PHY node 18 19Internal PHY node: 20- compatible : Should be "qcom,fsm9900-emac-sgmii" or "qcom,qdf2432-emac-sgmii". 21- reg : Offset and length of the register region(s) for the device 22- interrupts : Interrupt number used by this controller 23 24The external phy child node: 25- reg : The phy address 26 27Example: 28 29FSM9900: 30 31soc { 32 #address-cells = <1>; 33 #size-cells = <1>; 34 35 emac0: ethernet@feb20000 { 36 compatible = "qcom,fsm9900-emac"; 37 reg = <0xfeb20000 0x10000>, 38 <0xfeb36000 0x1000>; 39 interrupts = <76>; 40 41 clocks = <&gcc 0>, <&gcc 1>, <&gcc 3>, <&gcc 4>, <&gcc 5>, 42 <&gcc 6>, <&gcc 7>; 43 clock-names = "axi_clk", "cfg_ahb_clk", "high_speed_clk", 44 "mdio_clk", "tx_clk", "rx_clk", "sys_clk"; 45 46 internal-phy = <&emac_sgmii>; 47 48 phy-handle = <&phy0>; 49 50 #address-cells = <1>; 51 #size-cells = <0>; 52 phy0: ethernet-phy@0 { 53 reg = <0>; 54 }; 55 56 pinctrl-names = "default"; 57 pinctrl-0 = <&mdio_pins_a>; 58 }; 59 60 emac_sgmii: ethernet@feb38000 { 61 compatible = "qcom,fsm9900-emac-sgmii"; 62 reg = <0xfeb38000 0x1000>; 63 interrupts = <80>; 64 }; 65 66 tlmm: pinctrl@fd510000 { 67 compatible = "qcom,fsm9900-pinctrl"; 68 69 mdio_pins_a: mdio { 70 state { 71 pins = "gpio123", "gpio124"; 72 function = "mdio"; 73 }; 74 }; 75 }; 76 77 78QDF2432: 79 80soc { 81 #address-cells = <2>; 82 #size-cells = <2>; 83 84 emac0: ethernet@38800000 { 85 compatible = "qcom,fsm9900-emac"; 86 reg = <0x0 0x38800000 0x0 0x10000>, 87 <0x0 0x38816000 0x0 0x1000>; 88 interrupts = <0 256 4>; 89 90 clocks = <&gcc 0>, <&gcc 1>, <&gcc 3>, <&gcc 4>, <&gcc 5>, 91 <&gcc 6>, <&gcc 7>; 92 clock-names = "axi_clk", "cfg_ahb_clk", "high_speed_clk", 93 "mdio_clk", "tx_clk", "rx_clk", "sys_clk"; 94 95 internal-phy = <&emac_sgmii>; 96 97 phy-handle = <&phy0>; 98 99 #address-cells = <1>; 100 #size-cells = <0>; 101 phy0: ethernet-phy@4 { 102 reg = <4>; 103 }; 104 }; 105 106 emac_sgmii: ethernet@410400 { 107 compatible = "qcom,qdf2432-emac-sgmii"; 108 reg = <0x0 0x00410400 0x0 0xc00>, /* Base address */ 109 <0x0 0x00410000 0x0 0x400>; /* Per-lane digital */ 110 interrupts = <0 254 1>; 111 }; 112