xref: /freebsd/sys/contrib/device-tree/Bindings/net/qca,ar803x.yaml (revision 59c8e88e72633afbc47a4ace0d2170d00d51f7dc) 
1# SPDX-License-Identifier: GPL-2.0+
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/net/qca,ar803x.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm Atheros AR803x PHY
8
9maintainers:
10  - Andrew Lunn <andrew@lunn.ch>
11  - Florian Fainelli <f.fainelli@gmail.com>
12  - Heiner Kallweit <hkallweit1@gmail.com>
13
14description: |
15  Bindings for Qualcomm Atheros AR803x PHYs
16
17allOf:
18  - $ref: ethernet-phy.yaml#
19
20properties:
21  qca,clk-out-frequency:
22    description: Clock output frequency in Hertz.
23    $ref: /schemas/types.yaml#/definitions/uint32
24    enum: [25000000, 50000000, 62500000, 125000000]
25
26  qca,clk-out-strength:
27    description: Clock output driver strength.
28    $ref: /schemas/types.yaml#/definitions/uint32
29    enum: [0, 1, 2]
30
31  qca,disable-smarteee:
32    description: Disable Atheros SmartEEE feature.
33    type: boolean
34
35  qca,keep-pll-enabled:
36    description: |
37      If set, keep the PLL enabled even if there is no link. Useful if you
38      want to use the clock output without an ethernet link.
39
40      Only supported on the AR8031.
41    type: boolean
42
43  qca,disable-hibernation-mode:
44    description: |
45      Disable Atheros AR803X PHYs hibernation mode. If present, indicates
46      that the hardware of PHY will not enter power saving mode when the
47      cable is disconnected. And the RX_CLK always keeps outputting a
48      valid clock.
49    type: boolean
50
51  qca,smarteee-tw-us-100m:
52    description: EEE Tw parameter for 100M links.
53    $ref: /schemas/types.yaml#/definitions/uint32
54    minimum: 1
55    maximum: 255
56
57  qca,smarteee-tw-us-1g:
58    description: EEE Tw parameter for gigabit links.
59    $ref: /schemas/types.yaml#/definitions/uint32
60    minimum: 1
61    maximum: 255
62
63  vddio-supply:
64    description: |
65      RGMII I/O voltage regulator (see regulator/regulator.yaml).
66
67      The PHY supports RGMII I/O voltages of 1.5V, 1.8V and 2.5V. You can
68      either connect this to the vddio-regulator (1.5V / 1.8V) or the
69      vddh-regulator (2.5V).
70
71      Only supported on the AR8031.
72
73  vddio-regulator:
74    type: object
75    description:
76      Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V.
77    $ref: /schemas/regulator/regulator.yaml
78
79  vddh-regulator:
80    type: object
81    description:
82      Dummy subnode to model the external connection of the PHY VDDH
83      regulator to VDDIO.
84    $ref: /schemas/regulator/regulator.yaml
85
86unevaluatedProperties: false
87
88examples:
89  - |
90    #include <dt-bindings/net/qca-ar803x.h>
91
92    ethernet {
93        #address-cells = <1>;
94        #size-cells = <0>;
95
96        phy-mode = "rgmii-id";
97
98        ethernet-phy@0 {
99            reg = <0>;
100
101            qca,clk-out-frequency = <125000000>;
102            qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
103
104            vddio-supply = <&vddio>;
105
106            vddio: vddio-regulator {
107                regulator-min-microvolt = <1800000>;
108                regulator-max-microvolt = <1800000>;
109            };
110        };
111    };
112  - |
113    #include <dt-bindings/net/qca-ar803x.h>
114
115    ethernet {
116        #address-cells = <1>;
117        #size-cells = <0>;
118
119        phy-mode = "rgmii-id";
120
121        ethernet-phy@0 {
122            reg = <0>;
123
124            qca,clk-out-frequency = <50000000>;
125            qca,keep-pll-enabled;
126
127            vddio-supply = <&vddh>;
128
129            vddh: vddh-regulator {
130            };
131        };
132    };
133