1Microsemi MII Management Controller (MIIM) / MDIO 2================================================= 3 4Properties: 5- compatible: must be "mscc,ocelot-miim" 6- reg: The base address of the MDIO bus controller register bank. Optionally, a 7 second register bank can be defined if there is an associated reset register 8 for internal PHYs 9- #address-cells: Must be <1>. 10- #size-cells: Must be <0>. MDIO addresses have no size component. 11- interrupts: interrupt specifier (refer to the interrupt binding) 12 13Typically an MDIO bus might have several children. 14 15Example: 16 mdio@107009c { 17 #address-cells = <1>; 18 #size-cells = <0>; 19 compatible = "mscc,ocelot-miim"; 20 reg = <0x107009c 0x36>, <0x10700f0 0x8>; 21 interrupts = <14>; 22 23 phy0: ethernet-phy@0 { 24 reg = <0>; 25 }; 26 }; 27