xref: /freebsd/sys/contrib/device-tree/Bindings/net/microchip,lan966x-switch.yaml (revision 1719886f6d08408b834d270c59ffcfd821c8f63a) 
1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/net/microchip,lan966x-switch.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Microchip Lan966x Ethernet switch controller
8
9maintainers:
10  - Horatiu Vultur <horatiu.vultur@microchip.com>
11
12description: |
13  The lan966x switch is a multi-port Gigabit AVB/TSN Ethernet Switch with
14  two integrated 10/100/1000Base-T PHYs. In addition to the integrated PHYs,
15  it supports up to 2RGMII/RMII, up to 3BASE-X/SERDES/2.5GBASE-X and up to
16  2 Quad-SGMII/Quad-USGMII interfaces.
17
18properties:
19  $nodename:
20    pattern: "^switch@[0-9a-f]+$"
21
22  compatible:
23    const: microchip,lan966x-switch
24
25  reg:
26    items:
27      - description: cpu target
28      - description: general control block target
29
30  reg-names:
31    items:
32      - const: cpu
33      - const: gcb
34
35  interrupts:
36    minItems: 1
37    items:
38      - description: register based extraction
39      - description: frame dma based extraction
40      - description: analyzer interrupt
41      - description: ptp interrupt
42      - description: ptp external interrupt
43
44  interrupt-names:
45    minItems: 1
46    items:
47      - const: xtr
48      - const: fdma
49      - const: ana
50      - const: ptp
51      - const: ptp-ext
52
53  resets:
54    items:
55      - description: Reset controller used for switch core reset (soft reset)
56
57  reset-names:
58    items:
59      - const: switch
60
61  ethernet-ports:
62    type: object
63
64    properties:
65      '#address-cells':
66        const: 1
67      '#size-cells':
68        const: 0
69
70    additionalProperties: false
71
72    patternProperties:
73      "^port@[0-9a-f]+$":
74        type: object
75
76        $ref: /schemas/net/ethernet-controller.yaml#
77        unevaluatedProperties: false
78
79        properties:
80          '#address-cells':
81            const: 1
82          '#size-cells':
83            const: 0
84
85          reg:
86            description:
87              Switch port number
88
89          phys:
90            description:
91              Phandle of a Ethernet SerDes PHY
92
93          phy-mode:
94            description:
95              This specifies the interface used by the Ethernet SerDes towards
96              the PHY or SFP.
97            enum:
98              - gmii
99              - sgmii
100              - qsgmii
101              - 1000base-x
102              - 2500base-x
103
104          phy-handle:
105            description:
106              Phandle of a Ethernet PHY.
107
108          sfp:
109            description:
110              Phandle of an SFP.
111
112          managed: true
113
114        required:
115          - reg
116          - phys
117          - phy-mode
118
119        oneOf:
120          - required:
121              - phy-handle
122          - required:
123              - sfp
124              - managed
125
126required:
127  - compatible
128  - reg
129  - reg-names
130  - interrupts
131  - interrupt-names
132  - resets
133  - reset-names
134  - ethernet-ports
135
136additionalProperties: false
137
138examples:
139  - |
140    #include <dt-bindings/interrupt-controller/arm-gic.h>
141    switch: switch@e0000000 {
142      compatible = "microchip,lan966x-switch";
143      reg =  <0xe0000000 0x0100000>,
144             <0xe2000000 0x0800000>;
145      reg-names = "cpu", "gcb";
146      interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
147      interrupt-names = "xtr";
148      resets = <&switch_reset 0>;
149      reset-names = "switch";
150      ethernet-ports {
151        #address-cells = <1>;
152        #size-cells = <0>;
153
154        port0: port@0 {
155          reg = <0>;
156          phy-handle = <&phy0>;
157          phys = <&serdes 0 0>;
158          phy-mode = "gmii";
159        };
160
161        port1: port@1 {
162          reg = <1>;
163          sfp = <&sfp_eth1>;
164          managed = "in-band-status";
165          phys = <&serdes 2 4>;
166          phy-mode = "sgmii";
167        };
168      };
169    };
170
171...
172