xref: /freebsd/sys/contrib/device-tree/Bindings/net/fsl,fec.yaml (revision b97ee269eae3cbaf35c18f51a459aea581c2a7dc) 
1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/net/fsl,fec.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Freescale Fast Ethernet Controller (FEC)
8
9maintainers:
10  - Joakim Zhang <qiangqing.zhang@nxp.com>
11
12allOf:
13  - $ref: ethernet-controller.yaml#
14
15properties:
16  compatible:
17    oneOf:
18      - enum:
19          - fsl,imx25-fec
20          - fsl,imx27-fec
21          - fsl,imx28-fec
22          - fsl,imx6q-fec
23          - fsl,mvf600-fec
24      - items:
25          - enum:
26              - fsl,imx53-fec
27              - fsl,imx6sl-fec
28          - const: fsl,imx25-fec
29      - items:
30          - enum:
31              - fsl,imx35-fec
32              - fsl,imx51-fec
33          - const: fsl,imx27-fec
34      - items:
35          - enum:
36              - fsl,imx6ul-fec
37              - fsl,imx6sx-fec
38          - const: fsl,imx6q-fec
39      - items:
40          - enum:
41              - fsl,imx7d-fec
42          - const: fsl,imx6sx-fec
43      - items:
44          - const: fsl,imx8mq-fec
45          - const: fsl,imx6sx-fec
46      - items:
47          - enum:
48              - fsl,imx8mm-fec
49              - fsl,imx8mn-fec
50              - fsl,imx8mp-fec
51          - const: fsl,imx8mq-fec
52          - const: fsl,imx6sx-fec
53      - items:
54          - const: fsl,imx8qm-fec
55          - const: fsl,imx6sx-fec
56      - items:
57          - enum:
58              - fsl,imx8qxp-fec
59          - const: fsl,imx8qm-fec
60          - const: fsl,imx6sx-fec
61      - items:
62          - enum:
63              - fsl,imx8ulp-fec
64          - const: fsl,imx6ul-fec
65          - const: fsl,imx6q-fec
66
67  reg:
68    maxItems: 1
69
70  interrupts:
71    minItems: 1
72    maxItems: 4
73
74  interrupt-names:
75    oneOf:
76      - items:
77          - const: int0
78      - items:
79          - const: int0
80          - const: pps
81      - items:
82          - const: int0
83          - const: int1
84          - const: int2
85      - items:
86          - const: int0
87          - const: int1
88          - const: int2
89          - const: pps
90
91  clocks:
92    minItems: 2
93    maxItems: 5
94    description:
95      The "ipg", for MAC ipg_clk_s, ipg_clk_mac_s that are for register accessing.
96      The "ahb", for MAC ipg_clk, ipg_clk_mac that are bus clock.
97      The "ptp"(option), for IEEE1588 timer clock that requires the clock.
98      The "enet_clk_ref"(option), for MAC transmit/receiver reference clock like
99      RGMII TXC clock or RMII reference clock. It depends on board design,
100      the clock is required if RGMII TXC and RMII reference clock source from
101      SOC internal PLL.
102      The "enet_out"(option), output clock for external device, like supply clock
103      for PHY. The clock is required if PHY clock source from SOC.
104      The "enet_2x_txclk"(option), for RGMII sampling clock which fixed at 250Mhz.
105      The clock is required if SoC RGMII enable clock delay.
106
107  clock-names:
108    minItems: 2
109    maxItems: 5
110    items:
111      enum:
112        - ipg
113        - ahb
114        - ptp
115        - enet_clk_ref
116        - enet_out
117        - enet_2x_txclk
118
119  phy-mode: true
120
121  phy-handle: true
122
123  fixed-link: true
124
125  local-mac-address: true
126
127  mac-address: true
128
129  nvmem-cells: true
130
131  nvmem-cell-names: true
132
133  tx-internal-delay-ps:
134    enum: [0, 2000]
135
136  rx-internal-delay-ps:
137    enum: [0, 2000]
138
139  phy-supply:
140    description:
141      Regulator that powers the Ethernet PHY.
142
143  fsl,num-tx-queues:
144    $ref: /schemas/types.yaml#/definitions/uint32
145    description:
146      The property is valid for enet-avb IP, which supports hw multi queues.
147      Should specify the tx queue number, otherwise set tx queue number to 1.
148    enum: [1, 2, 3]
149
150  fsl,num-rx-queues:
151    $ref: /schemas/types.yaml#/definitions/uint32
152    description:
153      The property is valid for enet-avb IP, which supports hw multi queues.
154      Should specify the rx queue number, otherwise set rx queue number to 1.
155    enum: [1, 2, 3]
156
157  fsl,magic-packet:
158    $ref: /schemas/types.yaml#/definitions/flag
159    description:
160      If present, indicates that the hardware supports waking up via magic packet.
161
162  fsl,err006687-workaround-present:
163    $ref: /schemas/types.yaml#/definitions/flag
164    description:
165      If present indicates that the system has the hardware workaround for
166      ERR006687 applied and does not need a software workaround.
167
168  fsl,stop-mode:
169    $ref: /schemas/types.yaml#/definitions/phandle-array
170    items:
171      - items:
172          - description: phandle to general purpose register node
173          - description: the gpr register offset for ENET stop request
174          - description: the gpr bit offset for ENET stop request
175    description:
176      Register bits of stop mode control, the format is <&gpr req_gpr req_bit>.
177
178  mdio:
179    $ref: mdio.yaml#
180    unevaluatedProperties: false
181    description:
182      Specifies the mdio bus in the FEC, used as a container for phy nodes.
183
184  # Deprecated optional properties:
185  # To avoid these, create a phy node according to ethernet-phy.yaml in the same
186  # directory, and point the FEC's "phy-handle" property to it. Then use
187  # the phy's reset binding, again described by ethernet-phy.yaml.
188
189  phy-reset-gpios:
190    deprecated: true
191    description:
192      Should specify the gpio for phy reset.
193
194  phy-reset-duration:
195    $ref: /schemas/types.yaml#/definitions/uint32
196    deprecated: true
197    description:
198      Reset duration in milliseconds.  Should present only if property
199      "phy-reset-gpios" is available.  Missing the property will have the
200      duration be 1 millisecond.  Numbers greater than 1000 are invalid
201      and 1 millisecond will be used instead.
202
203  phy-reset-active-high:
204    type: boolean
205    deprecated: true
206    description:
207      If present then the reset sequence using the GPIO specified in the
208      "phy-reset-gpios" property is reversed (H=reset state, L=operation state).
209
210  phy-reset-post-delay:
211    $ref: /schemas/types.yaml#/definitions/uint32
212    deprecated: true
213    description:
214      Post reset delay in milliseconds. If present then a delay of phy-reset-post-delay
215      milliseconds will be observed after the phy-reset-gpios has been toggled.
216      Can be omitted thus no delay is observed. Delay is in range of 1ms to 1000ms.
217      Other delays are invalid.
218
219required:
220  - compatible
221  - reg
222  - interrupts
223
224# FIXME: We had better set additionalProperties to false to avoid invalid or at
225# least undocumented properties. However, PHY may have a deprecated option to
226# place PHY OF properties in the MAC node, such as Micrel PHY, and we can find
227# these boards which is based on i.MX6QDL.
228unevaluatedProperties: false
229
230examples:
231  - |
232    ethernet@83fec000 {
233      compatible = "fsl,imx51-fec", "fsl,imx27-fec";
234      reg = <0x83fec000 0x4000>;
235      interrupts = <87>;
236      phy-mode = "mii";
237      phy-reset-gpios = <&gpio2 14 0>;
238      phy-supply = <&reg_fec_supply>;
239    };
240
241    ethernet@83fed000 {
242      compatible = "fsl,imx51-fec", "fsl,imx27-fec";
243      reg = <0x83fed000 0x4000>;
244      interrupts = <87>;
245      phy-mode = "mii";
246      phy-reset-gpios = <&gpio2 14 0>;
247      phy-supply = <&reg_fec_supply>;
248      phy-handle = <&ethphy0>;
249
250      mdio {
251        #address-cells = <1>;
252        #size-cells = <0>;
253
254        ethphy0: ethernet-phy@0 {
255          compatible = "ethernet-phy-ieee802.3-c22";
256          reg = <0>;
257        };
258      };
259    };
260