xref: /freebsd/sys/contrib/device-tree/Bindings/net/ethernet-phy.yaml (revision af23369a6deaaeb612ab266eb88b8bb8d560c322) 
1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/net/ethernet-phy.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Ethernet PHY Generic Binding
8
9maintainers:
10  - Andrew Lunn <andrew@lunn.ch>
11  - Florian Fainelli <f.fainelli@gmail.com>
12  - Heiner Kallweit <hkallweit1@gmail.com>
13
14# The dt-schema tools will generate a select statement first by using
15# the compatible, and second by using the node name if any. In our
16# case, the node name is the one we want to match on, while the
17# compatible is optional.
18select:
19  properties:
20    $nodename:
21      pattern: "^ethernet-phy(@[a-f0-9]+)?$"
22
23  required:
24    - $nodename
25
26properties:
27  $nodename:
28    pattern: "^ethernet-phy(@[a-f0-9]+)?$"
29
30  compatible:
31    oneOf:
32      - const: ethernet-phy-ieee802.3-c22
33        description: PHYs that implement IEEE802.3 clause 22
34      - const: ethernet-phy-ieee802.3-c45
35        description: PHYs that implement IEEE802.3 clause 45
36      - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
37        description:
38          If the PHY reports an incorrect ID (or none at all) then the
39          compatible list may contain an entry with the correct PHY ID
40          in the above form.
41          The first group of digits is the 16 bit Phy Identifier 1
42          register, this is the chip vendor OUI bits 3:18. The
43          second group of digits is the Phy Identifier 2 register,
44          this is the chip vendor OUI bits 19:24, followed by 10
45          bits of a vendor specific ID.
46      - items:
47          - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
48          - const: ethernet-phy-ieee802.3-c22
49      - items:
50          - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
51          - const: ethernet-phy-ieee802.3-c45
52
53  reg:
54    minimum: 0
55    maximum: 31
56    description:
57      The ID number for the PHY.
58
59  interrupts:
60    maxItems: 1
61
62  max-speed:
63    enum:
64      - 10
65      - 100
66      - 1000
67      - 2500
68      - 5000
69      - 10000
70      - 20000
71      - 25000
72      - 40000
73      - 50000
74      - 56000
75      - 100000
76      - 200000
77    description:
78      Maximum PHY supported speed in Mbits / seconds.
79
80  phy-10base-t1l-2.4vpp:
81    description: |
82      tristate, request/disable 2.4 Vpp operating mode. The values are:
83      0: Disable 2.4 Vpp operating mode.
84      1: Request 2.4 Vpp operating mode from link partner.
85      Absence of this property will leave configuration to default values.
86    $ref: "/schemas/types.yaml#/definitions/uint32"
87    enum: [0, 1]
88
89  broken-turn-around:
90    $ref: /schemas/types.yaml#/definitions/flag
91    description:
92      If set, indicates the PHY device does not correctly release
93      the turn around line low at end of the control phase of the
94      MDIO transaction.
95
96  enet-phy-lane-swap:
97    $ref: /schemas/types.yaml#/definitions/flag
98    description:
99      If set, indicates the PHY will swap the TX/RX lanes to
100      compensate for the board being designed with the lanes
101      swapped.
102
103  enet-phy-lane-no-swap:
104    $ref: /schemas/types.yaml#/definitions/flag
105    description:
106      If set, indicates that PHY will disable swap of the
107      TX/RX lanes. This property allows the PHY to work correcly after
108      e.g. wrong bootstrap configuration caused by issues in PCB
109      layout design.
110
111  eee-broken-100tx:
112    $ref: /schemas/types.yaml#/definitions/flag
113    description:
114      Mark the corresponding energy efficient ethernet mode as
115      broken and request the ethernet to stop advertising it.
116
117  eee-broken-1000t:
118    $ref: /schemas/types.yaml#/definitions/flag
119    description:
120      Mark the corresponding energy efficient ethernet mode as
121      broken and request the ethernet to stop advertising it.
122
123  eee-broken-10gt:
124    $ref: /schemas/types.yaml#/definitions/flag
125    description:
126      Mark the corresponding energy efficient ethernet mode as
127      broken and request the ethernet to stop advertising it.
128
129  eee-broken-1000kx:
130    $ref: /schemas/types.yaml#/definitions/flag
131    description:
132      Mark the corresponding energy efficient ethernet mode as
133      broken and request the ethernet to stop advertising it.
134
135  eee-broken-10gkx4:
136    $ref: /schemas/types.yaml#/definitions/flag
137    description:
138      Mark the corresponding energy efficient ethernet mode as
139      broken and request the ethernet to stop advertising it.
140
141  eee-broken-10gkr:
142    $ref: /schemas/types.yaml#/definitions/flag
143    description:
144      Mark the corresponding energy efficient ethernet mode as
145      broken and request the ethernet to stop advertising it.
146
147  phy-is-integrated:
148    $ref: /schemas/types.yaml#/definitions/flag
149    description:
150      If set, indicates that the PHY is integrated into the same
151      physical package as the Ethernet MAC. If needed, muxers
152      should be configured to ensure the integrated PHY is
153      used. The absence of this property indicates the muxers
154      should be configured so that the external PHY is used.
155
156  resets:
157    maxItems: 1
158
159  reset-names:
160    const: phy
161
162  reset-gpios:
163    maxItems: 1
164    description:
165      The GPIO phandle and specifier for the PHY reset signal.
166
167  reset-assert-us:
168    description:
169      Delay after the reset was asserted in microseconds. If this
170      property is missing the delay will be skipped.
171
172  reset-deassert-us:
173    description:
174      Delay after the reset was deasserted in microseconds. If
175      this property is missing the delay will be skipped.
176
177  sfp:
178    $ref: /schemas/types.yaml#/definitions/phandle
179    description:
180      Specifies a reference to a node representing a SFP cage.
181
182  rx-internal-delay-ps:
183    description: |
184      RGMII Receive PHY Clock Delay defined in pico seconds.  This is used for
185      PHY's that have configurable RX internal delays.  If this property is
186      present then the PHY applies the RX delay.
187
188  tx-internal-delay-ps:
189    description: |
190      RGMII Transmit PHY Clock Delay defined in pico seconds.  This is used for
191      PHY's that have configurable TX internal delays. If this property is
192      present then the PHY applies the TX delay.
193
194required:
195  - reg
196
197additionalProperties: true
198
199examples:
200  - |
201    ethernet {
202        #address-cells = <1>;
203        #size-cells = <0>;
204
205        ethernet-phy@0 {
206            compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c45";
207            interrupt-parent = <&PIC>;
208            interrupts = <35 1>;
209            reg = <0>;
210
211            resets = <&rst 8>;
212            reset-names = "phy";
213            reset-gpios = <&gpio1 4 1>;
214            reset-assert-us = <1000>;
215            reset-deassert-us = <2000>;
216        };
217    };
218