1Vitesse VSC73xx Switches 2======================== 3 4This defines device tree bindings for the Vitesse VSC73xx switch chips. 5The Vitesse company has been acquired by Microsemi and Microsemi has 6been acquired Microchip but retains this vendor branding. 7 8The currently supported switch chips are: 9Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch 10Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch 11Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch 12Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch 13 14This switch could have two different management interface. 15 16If SPI interface is used, the device tree node is an SPI device so it must 17reside inside a SPI bus device tree node, see spi/spi-bus.txt 18 19When the chip is connected to a parallel memory bus and work in memory-mapped 20I/O mode, a platform device is used to represent the vsc73xx. In this case it 21must reside inside a platform bus device tree node. 22 23Required properties: 24 25- compatible: must be exactly one of: 26 "vitesse,vsc7385" 27 "vitesse,vsc7388" 28 "vitesse,vsc7395" 29 "vitesse,vsc7398" 30- gpio-controller: indicates that this switch is also a GPIO controller, 31 see gpio/gpio.txt 32- #gpio-cells: this must be set to <2> and indicates that we are a twocell 33 GPIO controller, see gpio/gpio.txt 34 35Optional properties: 36 37- reset-gpios: a handle to a GPIO line that can issue reset of the chip. 38 It should be tagged as active low. 39 40Required subnodes: 41 42See net/dsa/dsa.txt for a list of additional required and optional properties 43and subnodes of DSA switches. 44 45Examples: 46 47SPI: 48switch@0 { 49 compatible = "vitesse,vsc7395"; 50 reg = <0>; 51 /* Specified for 2.5 MHz or below */ 52 spi-max-frequency = <2500000>; 53 gpio-controller; 54 #gpio-cells = <2>; 55 56 ports { 57 #address-cells = <1>; 58 #size-cells = <0>; 59 60 port@0 { 61 reg = <0>; 62 label = "lan1"; 63 }; 64 port@1 { 65 reg = <1>; 66 label = "lan2"; 67 }; 68 port@2 { 69 reg = <2>; 70 label = "lan3"; 71 }; 72 port@3 { 73 reg = <3>; 74 label = "lan4"; 75 }; 76 vsc: port@6 { 77 reg = <6>; 78 ethernet = <&gmac1>; 79 phy-mode = "rgmii"; 80 fixed-link { 81 speed = <1000>; 82 full-duplex; 83 pause; 84 }; 85 }; 86 }; 87}; 88 89Platform: 90switch@2,0 { 91 #address-cells = <1>; 92 #size-cells = <1>; 93 compatible = "vitesse,vsc7385"; 94 reg = <0x2 0x0 0x20000>; 95 reset-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; 96 97 ports { 98 #address-cells = <1>; 99 #size-cells = <0>; 100 101 port@0 { 102 reg = <0>; 103 label = "lan1"; 104 }; 105 port@1 { 106 reg = <1>; 107 label = "lan2"; 108 }; 109 port@2 { 110 reg = <2>; 111 label = "lan3"; 112 }; 113 port@3 { 114 reg = <3>; 115 label = "lan4"; 116 }; 117 vsc: port@6 { 118 reg = <6>; 119 ethernet = <&enet0>; 120 phy-mode = "rgmii"; 121 fixed-link { 122 speed = <1000>; 123 full-duplex; 124 pause; 125 }; 126 }; 127 }; 128 129}; 130