xref: /freebsd/sys/contrib/device-tree/Bindings/net/can/microchip,mcp251x.txt (revision 8ddb146abcdf061be9f2c0db7e391697dafad85c) 
1* Microchip MCP251X stand-alone CAN controller device tree bindings
2
3Required properties:
4 - compatible: Should be one of the following:
5   - "microchip,mcp2510" for MCP2510.
6   - "microchip,mcp2515" for MCP2515.
7   - "microchip,mcp25625" for MCP25625.
8 - reg: SPI chip select.
9 - clocks: The clock feeding the CAN controller.
10 - interrupts: Should contain IRQ line for the CAN controller.
11
12Optional properties:
13 - vdd-supply: Regulator that powers the CAN controller.
14 - xceiver-supply: Regulator that powers the CAN transceiver.
15 - gpio-controller: Indicates this device is a GPIO controller.
16 - #gpio-cells: Should be two. The first cell is the pin number and
17                the second cell is used to specify the gpio polarity.
18
19Example:
20	can0: can@1 {
21		compatible = "microchip,mcp2515";
22		reg = <1>;
23		clocks = <&clk24m>;
24		interrupt-parent = <&gpio4>;
25		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
26		vdd-supply = <&reg5v0>;
27		xceiver-supply = <&reg5v0>;
28		gpio-controller;
29		#gpio-cells = <2>;
30	};
31