1NXP LPC32xx SoC NAND MLC controller 2 3Required properties: 4- compatible: "nxp,lpc3220-mlc" 5- reg: Address and size of the controller 6- interrupts: The NAND interrupt specification 7- gpios: GPIO specification for NAND write protect 8 9The following required properties are very controller specific. See the LPC32xx 10User Manual 7.5.14 MLC NAND Timing Register (the values here are specified in 11Hz, to make them independent of actual clock speed and to provide for good 12accuracy:) 13- nxp,tcea_delay: TCEA_DELAY 14- nxp,busy_delay: BUSY_DELAY 15- nxp,nand_ta: NAND_TA 16- nxp,rd_high: RD_HIGH 17- nxp,rd_low: RD_LOW 18- nxp,wr_high: WR_HIGH 19- nxp,wr_low: WR_LOW 20 21Optional subnodes: 22- Partitions, see Documentation/devicetree/bindings/mtd/mtd.yaml 23 24Example: 25 26 mlc: flash@200a8000 { 27 compatible = "nxp,lpc3220-mlc"; 28 reg = <0x200A8000 0x11000>; 29 interrupts = <11 0>; 30 #address-cells = <1>; 31 #size-cells = <1>; 32 33 nxp,tcea-delay = <333333333>; 34 nxp,busy-delay = <10000000>; 35 nxp,nand-ta = <18181818>; 36 nxp,rd-high = <31250000>; 37 nxp,rd-low = <45454545>; 38 nxp,wr-high = <40000000>; 39 nxp,wr-low = <83333333>; 40 gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */ 41 42 mtd0@00000000 { 43 label = "boot"; 44 reg = <0x00000000 0x00064000>; 45 read-only; 46 }; 47 48 ... 49 50 }; 51