xref: /freebsd/sys/contrib/device-tree/Bindings/mtd/amlogic,meson-nand.yaml (revision 7fdf597e96a02165cfe22ff357b857d5fa15ed8a) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/mtd/amlogic,meson-nand.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
8
9allOf:
10  - $ref: nand-controller.yaml
11
12maintainers:
13  - liang.yang@amlogic.com
14
15properties:
16  compatible:
17    enum:
18      - amlogic,meson-gxl-nfc
19      - amlogic,meson-axg-nfc
20
21  reg:
22    maxItems: 2
23
24  reg-names:
25    items:
26      - const: nfc
27      - const: emmc
28
29  interrupts:
30    maxItems: 1
31
32  clocks:
33    minItems: 2
34
35  clock-names:
36    items:
37      - const: core
38      - const: device
39
40patternProperties:
41  "^nand@[0-7]$":
42    type: object
43    $ref: raw-nand-chip.yaml
44    properties:
45      reg:
46        minimum: 0
47        maximum: 1
48
49      nand-ecc-mode:
50        const: hw
51
52      nand-ecc-step-size:
53        enum: [512, 1024]
54
55      nand-ecc-strength:
56        enum: [8, 16, 24, 30, 40, 50, 60]
57        description: |
58          The ECC configurations that can be supported are as follows.
59            meson-gxl-nfc 8, 16, 24, 30, 40, 50, 60
60            meson-axg-nfc 8
61
62      nand-rb:
63        maxItems: 1
64        items:
65          maximum: 0
66
67    unevaluatedProperties: false
68
69    dependencies:
70      nand-ecc-strength: [nand-ecc-step-size]
71      nand-ecc-step-size: [nand-ecc-strength]
72
73
74required:
75  - compatible
76  - reg
77  - interrupts
78  - clocks
79  - clock-names
80
81unevaluatedProperties: false
82
83examples:
84  - |
85    #include <dt-bindings/clock/axg-clkc.h>
86    #include <dt-bindings/interrupt-controller/arm-gic.h>
87    nand-controller@ffe07800 {
88      compatible = "amlogic,meson-axg-nfc";
89      reg = <0xffe07800 0x100>, <0xffe07000 0x800>;
90      reg-names = "nfc", "emmc";
91      interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
92      clocks = <&clkc CLKID_SD_EMMC_C>,  <&clkc CLKID_FCLK_DIV2>;
93      clock-names = "core", "device";
94
95      pinctrl-0 = <&nand_pins>;
96      pinctrl-names = "default";
97
98      #address-cells = <1>;
99      #size-cells = <0>;
100
101      nand@0 {
102        reg = <0>;
103        nand-rb = <0>;
104      };
105    };
106
107...
108