xref: /freebsd/sys/contrib/device-tree/Bindings/mmc/nvidia,tegra20-sdhci.yaml (revision 0fca6ea1d4eea4c934cfff25ac9ee8ad6fe95583) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/mmc/nvidia,tegra20-sdhci.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: NVIDIA Tegra Secure Digital Host Controller
8
9maintainers:
10  - Thierry Reding <thierry.reding@gmail.com>
11  - Jon Hunter <jonathanh@nvidia.com>
12
13description: |
14  This controller on Tegra family SoCs provides an interface for MMC, SD, and
15  SDIO types of memory cards.
16
17  This file documents differences between the core properties described by
18  mmc-controller.yaml and the properties for the Tegra SDHCI controller.
19
20properties:
21  compatible:
22    oneOf:
23      - enum:
24          - nvidia,tegra20-sdhci
25          - nvidia,tegra30-sdhci
26          - nvidia,tegra114-sdhci
27          - nvidia,tegra124-sdhci
28          - nvidia,tegra210-sdhci
29          - nvidia,tegra186-sdhci
30          - nvidia,tegra194-sdhci
31
32      - items:
33          - const: nvidia,tegra132-sdhci
34          - const: nvidia,tegra124-sdhci
35
36      - items:
37          - enum:
38              - nvidia,tegra194-sdhci
39              - nvidia,tegra234-sdhci
40          - const: nvidia,tegra186-sdhci
41
42  reg:
43    maxItems: 1
44
45  interrupts:
46    maxItems: 1
47
48  assigned-clocks: true
49  assigned-clock-parents: true
50  assigned-clock-rates: true
51
52  clocks:
53    minItems: 1
54    maxItems: 2
55
56  clock-names:
57    minItems: 1
58    maxItems: 2
59
60  resets:
61    items:
62      - description: module reset
63
64  reset-names:
65    items:
66      - const: sdhci
67
68  power-gpios:
69    description: specify GPIOs for power control
70    maxItems: 1
71
72  interconnects:
73    items:
74      - description: memory read client
75      - description: memory write client
76
77  interconnect-names:
78    items:
79      - const: dma-mem # read
80      - const: write
81
82  iommus:
83    maxItems: 1
84
85  operating-points-v2: true
86
87  power-domains:
88    items:
89      - description: phandle to the core power domain
90
91  nvidia,default-tap:
92    description: Specify the default inbound sampling clock trimmer value for
93      non-tunable modes.
94
95      The values are used for compensating trace length differences by
96      adjusting the sampling point. The values are programmed to the Vendor
97      Clock Control Register. Please refer to the reference manual of the SoC
98      for correct values.
99
100      The DQS trim values are only used on controllers which support HS400
101      timing. Only SDMMC4 on Tegra210 and Tegra186 supports HS400.
102    $ref: /schemas/types.yaml#/definitions/uint32
103
104  nvidia,default-trim:
105    description: Specify the default outbound clock trimmer value.
106    $ref: /schemas/types.yaml#/definitions/uint32
107
108  nvidia,dqs-trim:
109    description: Specify DQS trim value for HS400 timing.
110    $ref: /schemas/types.yaml#/definitions/uint32
111
112  nvidia,pad-autocal-pull-down-offset-1v8:
113    description: Specify drive strength calibration offsets for 1.8 V
114      signaling modes.
115    $ref: /schemas/types.yaml#/definitions/uint32
116
117  nvidia,pad-autocal-pull-down-offset-1v8-timeout:
118    description: Specify drive strength used as a fallback in case the
119      automatic calibration times out on a 1.8 V signaling mode.
120    $ref: /schemas/types.yaml#/definitions/uint32
121
122  nvidia,pad-autocal-pull-down-offset-3v3:
123    description: Specify drive strength calibration offsets for 3.3 V
124      signaling modes.
125    $ref: /schemas/types.yaml#/definitions/uint32
126
127  nvidia,pad-autocal-pull-down-offset-3v3-timeout:
128    description: Specify drive strength used as a fallback in case the
129      automatic calibration times out on a 3.3 V signaling mode.
130    $ref: /schemas/types.yaml#/definitions/uint32
131
132  nvidia,pad-autocal-pull-down-offset-sdr104:
133    description: Specify drive strength calibration offsets for SDR104 mode.
134    $ref: /schemas/types.yaml#/definitions/uint32
135
136  nvidia,pad-autocal-pull-down-offset-hs400:
137    description: Specify drive strength calibration offsets for HS400 mode.
138    $ref: /schemas/types.yaml#/definitions/uint32
139
140  nvidia,pad-autocal-pull-up-offset-1v8:
141    description: Specify drive strength calibration offsets for 1.8 V
142      signaling modes.
143    $ref: /schemas/types.yaml#/definitions/uint32
144
145  nvidia,pad-autocal-pull-up-offset-1v8-timeout:
146    description: Specify drive strength used as a fallback in case the
147      automatic calibration times out on a 1.8 V signaling mode.
148    $ref: /schemas/types.yaml#/definitions/uint32
149
150  nvidia,pad-autocal-pull-up-offset-3v3:
151    description: Specify drive strength calibration offsets for 3.3 V
152      signaling modes.
153
154      The property values are drive codes which are programmed into the
155      PD_OFFSET and PU_OFFSET sections of the SDHCI_TEGRA_AUTO_CAL_CONFIG
156      register. A higher value corresponds to higher drive strength. Please
157      refer to the reference manual of the SoC for correct values. The SDR104
158      and HS400 timing specific values are used in corresponding modes if
159      specified.
160    $ref: /schemas/types.yaml#/definitions/uint32
161
162  nvidia,pad-autocal-pull-up-offset-3v3-timeout:
163    description: Specify drive strength used as a fallback in case the
164      automatic calibration times out on a 3.3 V signaling mode.
165    $ref: /schemas/types.yaml#/definitions/uint32
166
167  nvidia,pad-autocal-pull-up-offset-sdr104:
168    description: Specify drive strength calibration offsets for SDR104 mode.
169    $ref: /schemas/types.yaml#/definitions/uint32
170
171  nvidia,pad-autocal-pull-up-offset-hs400:
172    description: Specify drive strength calibration offsets for HS400 mode.
173    $ref: /schemas/types.yaml#/definitions/uint32
174
175  nvidia,only-1-8v:
176    description: The presence of this property indicates that the controller
177      operates at a 1.8 V fixed I/O voltage.
178    $ref: /schemas/types.yaml#/definitions/flag
179
180required:
181  - compatible
182  - reg
183  - interrupts
184  - clocks
185  - resets
186  - reset-names
187
188allOf:
189  - $ref: mmc-controller.yaml
190  - if:
191      properties:
192        compatible:
193          contains:
194            enum:
195              - nvidia,tegra20-sdhci
196              - nvidia,tegra30-sdhci
197              - nvidia,tegra114-sdhci
198              - nvidia,tegra124-sdhci
199    then:
200      properties:
201        clocks:
202          items:
203            - description: module clock
204    else:
205      properties:
206        clocks:
207          items:
208            - description: module clock
209            - description: timeout clock
210
211        clock-names:
212          items:
213            - const: sdhci
214            - const: tmclk
215      required:
216        - clock-names
217
218  - if:
219      properties:
220        compatible:
221          contains:
222            const: nvidia,tegra210-sdhci
223    then:
224      properties:
225        pinctrl-names:
226          oneOf:
227            - items:
228                - const: sdmmc-3v3
229                  description: pad configuration for 3.3 V
230                - const: sdmmc-1v8
231                  description: pad configuration for 1.8 V
232                - const: sdmmc-3v3-drv
233                  description: pull-up/down configuration for 3.3 V
234                - const: sdmmc-1v8-drv
235                  description: pull-up/down configuration for 1.8 V
236            - items:
237                - const: sdmmc-3v3-drv
238                  description: pull-up/down configuration for 3.3 V
239                - const: sdmmc-1v8-drv
240                  description: pull-up/down configuration for 1.8 V
241            - items:
242                - const: sdmmc-1v8-drv
243                  description: pull-up/down configuration for 1.8 V
244      required:
245        - clock-names
246  - if:
247      properties:
248        compatible:
249          contains:
250            enum:
251              - nvidia,tegra186-sdhci
252              - nvidia,tegra194-sdhci
253    then:
254      properties:
255        pinctrl-names:
256          items:
257            - const: sdmmc-3v3
258              description: pad configuration for 3.3 V
259            - const: sdmmc-1v8
260              description: pad configuration for 1.8 V
261      required:
262        - clock-names
263
264unevaluatedProperties: false
265
266examples:
267  - |
268    #include <dt-bindings/interrupt-controller/arm-gic.h>
269
270    mmc@c8000200 {
271        compatible = "nvidia,tegra20-sdhci";
272        reg = <0xc8000200 0x200>;
273        interrupts = <47>;
274        clocks = <&tegra_car 14>;
275        resets = <&tegra_car 14>;
276        reset-names = "sdhci";
277        cd-gpios = <&gpio 69 0>; /* gpio PI5 */
278        wp-gpios = <&gpio 57 0>; /* gpio PH1 */
279        power-gpios = <&gpio 155 0>; /* gpio PT3 */
280        bus-width = <8>;
281    };
282
283  - |
284    #include <dt-bindings/clock/tegra210-car.h>
285    #include <dt-bindings/interrupt-controller/arm-gic.h>
286
287    mmc@700b0000 {
288        compatible = "nvidia,tegra210-sdhci";
289        reg = <0x700b0000 0x200>;
290        interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
291        clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
292                 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
293        clock-names = "sdhci", "tmclk";
294        resets = <&tegra_car 14>;
295        reset-names = "sdhci";
296        pinctrl-names = "sdmmc-3v3", "sdmmc-1v8",
297                        "sdmmc-3v3-drv", "sdmmc-1v8-drv";
298        pinctrl-0 = <&sdmmc1_3v3>;
299        pinctrl-1 = <&sdmmc1_1v8>;
300        pinctrl-2 = <&sdmmc1_3v3_drv>;
301        pinctrl-3 = <&sdmmc1_1v8_drv>;
302        nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
303        nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
304        nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
305        nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
306        nvidia,default-tap = <0x2>;
307        nvidia,default-trim = <0x4>;
308        assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
309                          <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>,
310                          <&tegra_car TEGRA210_CLK_PLL_C4>;
311        assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
312        assigned-clock-rates = <200000000>, <1000000000>, <1000000000>;
313    };
314