1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC) 8 9maintainers: 10 - Steve Twiss <stwiss.opensource@diasemi.com> 11 12description: | 13 For device-tree bindings of other sub-modules refer to the binding documents 14 under the respective sub-system directories. 15 Using regulator-{uv,ov}-{warn,error,protection}-microvolt requires special 16 handling: First, when GP_FB2 is used, it must be ensured that there is no 17 moment where all voltage monitors are disabled. Next, as da9063 only supports 18 UV *and* OV monitoring, both must be set to the same severity and value 19 (0: disable, 1: enable). 20 21properties: 22 compatible: 23 enum: 24 - dlg,da9063 25 - dlg,da9063l 26 27 reg: 28 maxItems: 1 29 30 interrupts: 31 maxItems: 1 32 33 interrupt-controller: true 34 35 "#interrupt-cells": 36 const: 2 37 38 dlg,use-sw-pm: 39 type: boolean 40 description: 41 Disable the watchdog during suspend. 42 Only use this option if you can't use the watchdog automatic suspend 43 function during a suspend (see register CONTROL_B). 44 45 watchdog: 46 type: object 47 $ref: /schemas/watchdog/watchdog.yaml# 48 unevaluatedProperties: false 49 properties: 50 compatible: 51 const: dlg,da9063-watchdog 52 53 rtc: 54 type: object 55 $ref: /schemas/rtc/rtc.yaml# 56 unevaluatedProperties: false 57 properties: 58 compatible: 59 const: dlg,da9063-rtc 60 61 onkey: 62 type: object 63 $ref: /schemas/input/input.yaml# 64 unevaluatedProperties: false 65 properties: 66 compatible: 67 const: dlg,da9063-onkey 68 69 dlg,disable-key-power: 70 type: boolean 71 description: | 72 Disable power-down using a long key-press. 73 If this entry does not exist then by default the key-press triggered 74 power down is enabled and the OnKey will support both KEY_POWER and 75 KEY_SLEEP. 76 77 regulators: 78 type: object 79 additionalProperties: false 80 patternProperties: 81 "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": 82 $ref: /schemas/regulator/regulator.yaml 83 unevaluatedProperties: false 84 85required: 86 - compatible 87 - reg 88 - interrupts 89 - interrupt-controller 90 91additionalProperties: false 92 93examples: 94 - | 95 #include <dt-bindings/interrupt-controller/irq.h> 96 i2c { 97 #address-cells = <1>; 98 #size-cells = <0>; 99 pmic@58 { 100 compatible = "dlg,da9063"; 101 reg = <0x58>; 102 #interrupt-cells = <2>; 103 interrupt-parent = <&gpio6>; 104 interrupts = <11 IRQ_TYPE_LEVEL_LOW>; 105 interrupt-controller; 106 107 rtc { 108 compatible = "dlg,da9063-rtc"; 109 }; 110 111 watchdog { 112 compatible = "dlg,da9063-watchdog"; 113 }; 114 115 onkey { 116 compatible = "dlg,da9063-onkey"; 117 dlg,disable-key-power; 118 }; 119 120 regulators { 121 bcore1 { 122 regulator-name = "BCORE1"; 123 regulator-min-microvolt = <300000>; 124 regulator-max-microvolt = <1570000>; 125 regulator-min-microamp = <500000>; 126 regulator-max-microamp = <2000000>; 127 regulator-boot-on; 128 }; 129 ldo6 { 130 /* UNUSED */ 131 regulator-name = "LDO_6"; 132 regulator-uv-protection-microvolt = <0>; 133 regulator-ov-protection-microvolt = <0>; 134 }; 135 ldo11 { 136 regulator-name = "LDO_11"; 137 regulator-min-microvolt = <900000>; 138 regulator-max-microvolt = <900000>; 139 regulator-uv-protection-microvolt = <1>; 140 regulator-ov-protection-microvolt = <1>; 141 regulator-always-on; 142 }; 143 }; 144 }; 145 }; 146... 147