1------------------------------- 2BCM590xx Power Management Units 3------------------------------- 4 5Required properties: 6- compatible: "brcm,bcm59056" 7- reg: I2C slave address 8- interrupts: interrupt for the PMU. Generic interrupt client node bindings 9 are described in interrupt-controller/interrupts.txt 10 11------------------ 12Voltage Regulators 13------------------ 14 15Optional child nodes: 16- regulators: container node for regulators following the generic 17 regulator binding in regulator/regulator.txt 18 19 The valid regulator node names for BCM59056 are: 20 rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo, 21 mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo, 22 csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr, 23 gpldo1, gpldo2, gpldo3, gpldo4, gpldo5, gpldo6, 24 vbus 25 26Example: 27 pmu: bcm59056@8 { 28 compatible = "brcm,bcm59056"; 29 reg = <0x08>; 30 interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; 31 regulators { 32 rfldo_reg: rfldo { 33 regulator-min-microvolt = <1200000>; 34 regulator-max-microvolt = <3300000>; 35 }; 36 37 ... 38 }; 39 }; 40