xref: /freebsd/sys/contrib/device-tree/Bindings/memory-controllers/ti,gpmc.yaml (revision 5b56413d04e608379c9a306373554a8e4d321bc0) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Texas Instruments GPMC Memory Controller
8
9maintainers:
10  - Tony Lindgren <tony@atomide.com>
11  - Roger Quadros <rogerq@kernel.org>
12
13description:
14  The GPMC is a unified memory controller dedicated for interfacing
15  with external memory devices like
16  - Asynchronous SRAM-like memories and ASICs
17  - Asynchronous, synchronous, and page mode burst NOR flash
18  - NAND flash
19  - Pseudo-SRAM devices
20
21properties:
22  compatible:
23    items:
24      - enum:
25          - ti,am3352-gpmc
26          - ti,am64-gpmc
27          - ti,omap2420-gpmc
28          - ti,omap2430-gpmc
29          - ti,omap3430-gpmc
30          - ti,omap4430-gpmc
31
32  reg:
33    minItems: 1
34    maxItems: 2
35
36  reg-names:
37    items:
38      - const: cfg
39      - const: data
40
41  interrupts:
42    maxItems: 1
43
44  clocks:
45    maxItems: 1
46    description: |
47      Functional clock. Used for bus timing calculations and
48      GPMC configuration.
49
50  clock-names:
51    items:
52      - const: fck
53
54  power-domains:
55    maxItems: 1
56
57  dmas:
58    items:
59      - description: DMA channel for GPMC NAND prefetch
60
61  dma-names:
62    items:
63      - const: rxtx
64
65  "#address-cells": true
66
67  "#size-cells": true
68
69  gpmc,num-cs:
70    description: maximum number of supported chip-select lines.
71    $ref: /schemas/types.yaml#/definitions/uint32
72
73  gpmc,num-waitpins:
74    description: maximum number of supported wait pins.
75    $ref: /schemas/types.yaml#/definitions/uint32
76
77  ranges:
78    minItems: 1
79    description: |
80      Must be set up to reflect the memory layout with four
81      integer values for each chip-select line in use,
82      <cs-number> 0 <physical address of mapping> <size>
83    items:
84      - description: NAND bank 0
85      - description: NOR/SRAM bank 0
86      - description: NOR/SRAM bank 1
87
88  '#interrupt-cells':
89    const: 2
90
91  interrupt-controller:
92    description: |
93      The GPMC driver implements an interrupt controller for
94      the NAND events "fifoevent" and "termcount" plus the
95      rising/falling edges on the GPMC_WAIT pins.
96      The interrupt number mapping is as follows
97      0 - NAND_fifoevent
98      1 - NAND_termcount
99      2 - GPMC_WAIT0 pin edge
100      3 - GPMC_WAIT1 pin edge, and so on.
101
102  '#gpio-cells':
103    const: 2
104
105  gpio-controller:
106    description: |
107      The GPMC driver implements a GPIO controller for the
108      GPMC WAIT pins that can be used as general purpose inputs.
109      0 maps to GPMC_WAIT0 pin.
110
111  ti,hwmods:
112    description:
113      Name of the HWMOD associated with GPMC. This is for legacy
114      omap2/3 platforms only.
115    $ref: /schemas/types.yaml#/definitions/string
116    deprecated: true
117
118  ti,no-idle-on-init:
119    description:
120      Prevent idling the module at init. This is for legacy omap2/3
121      platforms only.
122    type: boolean
123    deprecated: true
124
125patternProperties:
126  "@[0-7],[a-f0-9]+$":
127    type: object
128    description: |
129      The child device node represents the device connected to the GPMC
130      bus. The device can be a NAND chip, SRAM device, NOR device
131      or an ASIC.
132    $ref: ti,gpmc-child.yaml
133    additionalProperties: true
134
135required:
136  - compatible
137  - reg
138  - gpmc,num-cs
139  - gpmc,num-waitpins
140  - "#address-cells"
141  - "#size-cells"
142
143allOf:
144  - if:
145      properties:
146        compatible:
147          contains:
148            const: ti,am64-gpmc
149    then:
150      required:
151        - reg-names
152        - power-domains
153
154additionalProperties: false
155
156examples:
157  - |
158    #include <dt-bindings/interrupt-controller/arm-gic.h>
159    #include <dt-bindings/gpio/gpio.h>
160
161    gpmc: memory-controller@50000000 {
162      compatible = "ti,am3352-gpmc";
163      reg = <0x50000000 0x2000>;
164      interrupts = <100>;
165      clocks = <&l3s_clkctrl>;
166      clock-names = "fck";
167      dmas = <&edma 52 0>;
168      dma-names = "rxtx";
169      gpmc,num-cs = <8>;
170      gpmc,num-waitpins = <2>;
171      #address-cells = <2>;
172      #size-cells = <1>;
173      ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */
174      interrupt-controller;
175      #interrupt-cells = <2>;
176      gpio-controller;
177      #gpio-cells = <2>;
178
179      nand@0,0 {
180        compatible = "ti,omap2-nand";
181        reg = <0 0 4>;
182        interrupt-parent = <&gpmc>;
183        interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
184                     <1 IRQ_TYPE_NONE>; /* termcount */
185        ti,nand-xfer-type = "prefetch-dma";
186        ti,nand-ecc-opt = "bch16";
187        ti,elm-id = <&elm>;
188        rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
189      };
190    };
191