1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/memory-controllers/renesas,rpc-if.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Renesas Reduced Pin Count Interface (RPC-IF) 8 9maintainers: 10 - Sergei Shtylyov <sergei.shtylyov@gmail.com> 11 12description: | 13 Renesas RPC-IF allows a SPI flash or HyperFlash connected to the SoC to 14 be accessed via the external address space read mode or the manual mode. 15 16 The flash chip itself should be represented by a subnode of the RPC-IF node. 17 The flash interface is selected based on the "compatible" property of this 18 subnode: 19 - if it contains "jedec,spi-nor", then SPI is used; 20 - if it contains "cfi-flash", then HyperFlash is used. 21 22allOf: 23 - $ref: "/schemas/spi/spi-controller.yaml#" 24 25properties: 26 compatible: 27 items: 28 - enum: 29 - renesas,r8a77970-rpc-if # R-Car V3M 30 - renesas,r8a77980-rpc-if # R-Car V3H 31 - renesas,r8a77995-rpc-if # R-Car D3 32 - const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 device 33 34 reg: 35 items: 36 - description: RPC-IF registers 37 - description: direct mapping read mode area 38 - description: write buffer area 39 40 reg-names: 41 items: 42 - const: regs 43 - const: dirmap 44 - const: wbuf 45 46 clocks: 47 maxItems: 1 48 49 power-domains: 50 maxItems: 1 51 52 resets: 53 maxItems: 1 54 55patternProperties: 56 "flash@[0-9a-f]+$": 57 type: object 58 properties: 59 compatible: 60 enum: 61 - cfi-flash 62 - jedec,spi-nor 63 64examples: 65 - | 66 #include <dt-bindings/clock/renesas-cpg-mssr.h> 67 #include <dt-bindings/power/r8a77995-sysc.h> 68 69 spi@ee200000 { 70 compatible = "renesas,r8a77995-rpc-if", "renesas,rcar-gen3-rpc-if"; 71 reg = <0xee200000 0x200>, 72 <0x08000000 0x4000000>, 73 <0xee208000 0x100>; 74 reg-names = "regs", "dirmap", "wbuf"; 75 clocks = <&cpg CPG_MOD 917>; 76 power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; 77 resets = <&cpg 917>; 78 #address-cells = <1>; 79 #size-cells = <0>; 80 81 flash@0 { 82 compatible = "jedec,spi-nor"; 83 reg = <0>; 84 spi-max-frequency = <40000000>; 85 spi-tx-bus-width = <1>; 86 spi-rx-bus-width = <1>; 87 }; 88 }; 89