xref: /freebsd/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov5675.yaml (revision a64729f5077d77e13b9497cb33ecb3c82e606ee8) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2# Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
3%YAML 1.2
4---
5$id: http://devicetree.org/schemas/media/i2c/ovti,ov5675.yaml#
6$schema: http://devicetree.org/meta-schemas/core.yaml#
7
8title: Omnivision OV5675 CMOS Sensor
9
10maintainers:
11  - Quentin Schulz <quentin.schulz@theobroma-systems.com>
12
13allOf:
14  - $ref: /schemas/media/video-interface-devices.yaml#
15
16description: |
17  The Omnivision OV5675 is a high performance, 1/5-inch, 5 megapixel, CMOS
18  image sensor that delivers 2592x1944 at 30fps. It provides full-frame,
19  sub-sampled, and windowed 10-bit MIPI images in various formats via the
20  Serial Camera Control Bus (SCCB) interface.
21
22  This chip is programmable through I2C and two-wire SCCB. The sensor output
23  is available via CSI-2 serial data output (up to 2-lane).
24
25properties:
26  compatible:
27    const: ovti,ov5675
28
29  reg:
30    maxItems: 1
31
32  clocks:
33    description:
34      System input clock (aka XVCLK). From 6 to 27 MHz.
35    maxItems: 1
36
37  dovdd-supply:
38    description:
39      Digital I/O voltage supply, 1.8 volts.
40
41  avdd-supply:
42    description:
43      Analog voltage supply, 2.8 volts.
44
45  dvdd-supply:
46    description:
47      Digital core voltage supply, 1.2 volts.
48
49  reset-gpios:
50    description:
51      The phandle and specifier for the GPIO that controls sensor reset.
52      This corresponds to the hardware pin XSHUTDN which is physically
53      active low.
54    maxItems: 1
55
56  port:
57    $ref: /schemas/graph.yaml#/$defs/port-base
58    additionalProperties: false
59
60    properties:
61      endpoint:
62        $ref: /schemas/media/video-interfaces.yaml#
63        unevaluatedProperties: false
64
65        properties:
66          data-lanes:
67            minItems: 1
68            maxItems: 2
69
70          # Supports max data transfer of 900 Mbps per lane
71          link-frequencies: true
72
73required:
74  - compatible
75  - reg
76  - clocks
77  - dovdd-supply
78  - avdd-supply
79  - dvdd-supply
80  - port
81
82unevaluatedProperties: false
83
84examples:
85  - |
86    #include <dt-bindings/clock/px30-cru.h>
87    #include <dt-bindings/gpio/gpio.h>
88    #include <dt-bindings/pinctrl/rockchip.h>
89
90    i2c {
91        #address-cells = <1>;
92        #size-cells = <0>;
93
94        ov5675: camera@36 {
95            compatible = "ovti,ov5675";
96            reg = <0x36>;
97
98            reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
99            pinctrl-names = "default";
100            pinctrl-0 = <&cif_clkout_m0>;
101
102            clocks = <&cru SCLK_CIF_OUT>;
103            assigned-clocks = <&cru SCLK_CIF_OUT>;
104            assigned-clock-rates = <19200000>;
105
106            avdd-supply = <&vcc_1v8>;
107            dvdd-supply = <&vcc_1v2>;
108            dovdd-supply = <&vcc_2v8>;
109
110            rotation = <90>;
111            orientation = <0>;
112
113            port {
114                ucam_out: endpoint {
115                    remote-endpoint = <&mipi_in_ucam>;
116                    data-lanes = <1 2>;
117                    link-frequencies = /bits/ 64 <450000000>;
118                };
119            };
120        };
121    };
122...
123