1* Omnivision OV5695 MIPI CSI-2 sensor 2 3Required Properties: 4- compatible: shall be "ovti,ov5695" 5- clocks: reference to the xvclk input clock 6- clock-names: shall be "xvclk" 7- avdd-supply: Analog voltage supply, 2.8 volts 8- dovdd-supply: Digital I/O voltage supply, 1.8 volts 9- dvdd-supply: Digital core voltage supply, 1.2 volts 10- reset-gpios: Low active reset gpio 11 12The device node shall contain one 'port' child node with an 13'endpoint' subnode for its digital output video port, 14in accordance with the video interface bindings defined in 15Documentation/devicetree/bindings/media/video-interfaces.txt. 16The endpoint optional property 'data-lanes' shall be "<1 2>". 17 18Example: 19&i2c7 { 20 ov5695: camera-sensor@36 { 21 compatible = "ovti,ov5695"; 22 reg = <0x36>; 23 pinctrl-names = "default"; 24 pinctrl-0 = <&clk_24m_cam>; 25 26 clocks = <&cru SCLK_TESTCLKOUT1>; 27 clock-names = "xvclk"; 28 29 avdd-supply = <&pp2800_cam>; 30 dovdd-supply = <&pp1800>; 31 dvdd-supply = <&pp1250_cam>; 32 reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; 33 34 port { 35 wcam_out: endpoint { 36 remote-endpoint = <&mipi_in_wcam>; 37 data-lanes = <1 2>; 38 }; 39 }; 40 }; 41}; 42