1* Aptina 1/3-Inch WVGA CMOS Digital Image Sensor 2 3The Aptina MT9V032 is a 1/3-inch CMOS active pixel digital image sensor with 4an active array size of 752H x 480V. It is programmable through a simple 5two-wire serial interface. 6 7Required Properties: 8 9- compatible: value should be either one among the following 10 (a) "aptina,mt9v022" for MT9V022 color sensor 11 (b) "aptina,mt9v022m" for MT9V022 monochrome sensor 12 (c) "aptina,mt9v024" for MT9V024 color sensor 13 (d) "aptina,mt9v024m" for MT9V024 monochrome sensor 14 (e) "aptina,mt9v032" for MT9V032 color sensor 15 (f) "aptina,mt9v032m" for MT9V032 monochrome sensor 16 (g) "aptina,mt9v034" for MT9V034 color sensor 17 (h) "aptina,mt9v034m" for MT9V034 monochrome sensor 18 19Optional Properties: 20 21- link-frequencies: List of allowed link frequencies in Hz. Each frequency is 22 expressed as a 64-bit big-endian integer. 23- reset-gpios: GPIO handle which is connected to the reset pin of the chip. 24- standby-gpios: GPIO handle which is connected to the standby pin of the chip. 25 26For further reading on port node refer to 27Documentation/devicetree/bindings/media/video-interfaces.txt. 28 29Example: 30 31 mt9v032@5c { 32 compatible = "aptina,mt9v032"; 33 reg = <0x5c>; 34 35 port { 36 mt9v032_out: endpoint { 37 link-frequencies = /bits/ 64 38 <13000000 26600000 27000000>; 39 }; 40 }; 41 }; 42