1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/media/i2c/imx219.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor 8 9maintainers: 10 - Dave Stevenson <dave.stevenson@raspberrypi.com> 11 12description: |- 13 The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor 14 with an active array size of 3280H x 2464V. It is programmable through 15 I2C interface. The I2C address is fixed to 0x10 as per sensor data sheet. 16 Image data is sent through MIPI CSI-2, which is configured as either 2 or 17 4 data lanes. 18 19properties: 20 compatible: 21 const: sony,imx219 22 23 reg: 24 description: I2C device address 25 maxItems: 1 26 27 clocks: 28 maxItems: 1 29 30 VDIG-supply: 31 description: 32 Digital I/O voltage supply, 1.8 volts 33 34 VANA-supply: 35 description: 36 Analog voltage supply, 2.8 volts 37 38 VDDL-supply: 39 description: 40 Digital core voltage supply, 1.2 volts 41 42 reset-gpios: 43 maxItems: 1 44 description: |- 45 Reference to the GPIO connected to the xclr pin, if any. 46 Must be released (set high) after all supplies are applied. 47 48 port: 49 $ref: /schemas/graph.yaml#/$defs/port-base 50 additionalProperties: false 51 52 properties: 53 endpoint: 54 $ref: /schemas/media/video-interfaces.yaml# 55 unevaluatedProperties: false 56 57 properties: 58 data-lanes: 59 description: |- 60 The sensor supports either two-lane, or four-lane operation. 61 If this property is omitted four-lane operation is assumed. 62 For two-lane operation the property must be set to <1 2>. 63 items: 64 - const: 1 65 - const: 2 66 67 clock-noncontinuous: true 68 link-frequencies: true 69 70 required: 71 - link-frequencies 72 73required: 74 - compatible 75 - reg 76 - clocks 77 - VANA-supply 78 - VDIG-supply 79 - VDDL-supply 80 - port 81 82additionalProperties: false 83 84examples: 85 - | 86 i2c0 { 87 #address-cells = <1>; 88 #size-cells = <0>; 89 90 imx219: sensor@10 { 91 compatible = "sony,imx219"; 92 reg = <0x10>; 93 clocks = <&imx219_clk>; 94 VANA-supply = <&imx219_vana>; /* 2.8v */ 95 VDIG-supply = <&imx219_vdig>; /* 1.8v */ 96 VDDL-supply = <&imx219_vddl>; /* 1.2v */ 97 98 port { 99 imx219_0: endpoint { 100 remote-endpoint = <&csi1_ep>; 101 data-lanes = <1 2>; 102 clock-noncontinuous; 103 link-frequencies = /bits/ 64 <456000000>; 104 }; 105 }; 106 }; 107 }; 108 109... 110