1* Analog Devices ADP1653 flash LED driver 2 3Required Properties: 4 5 - compatible: Must contain "adi,adp1653" 6 7 - reg: I2C slave address 8 9 - enable-gpios: Specifier of the GPIO connected to EN pin 10 11There are two LED outputs available - flash and indicator. One LED is 12represented by one child node, nodes need to be named "flash" and "indicator". 13 14Required properties of the LED child node: 15- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt 16 17Required properties of the flash LED child node: 18 19- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt 20- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt 21- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt 22 23Example: 24 25 adp1653: led-controller@30 { 26 compatible = "adi,adp1653"; 27 reg = <0x30>; 28 enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ 29 30 flash { 31 flash-timeout-us = <500000>; 32 flash-max-microamp = <320000>; 33 led-max-microamp = <50000>; 34 }; 35 indicator { 36 led-max-microamp = <17500>; 37 }; 38 }; 39