xref: /freebsd/sys/contrib/device-tree/Bindings/media/allwinner,sun6i-a31-csi.yaml (revision a8089ea5aee578e08acab2438e82fc9a9ae50ed8) 
1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-csi.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Allwinner A31 CMOS Sensor Interface (CSI)
8
9maintainers:
10  - Chen-Yu Tsai <wens@csie.org>
11  - Maxime Ripard <mripard@kernel.org>
12
13properties:
14  compatible:
15    enum:
16      - allwinner,sun6i-a31-csi
17      - allwinner,sun8i-a83t-csi
18      - allwinner,sun8i-h3-csi
19      - allwinner,sun8i-v3s-csi
20      - allwinner,sun50i-a64-csi
21
22  reg:
23    maxItems: 1
24
25  interrupts:
26    maxItems: 1
27
28  clocks:
29    items:
30      - description: Bus Clock
31      - description: Module Clock
32      - description: DRAM Clock
33
34  clock-names:
35    items:
36      - const: bus
37      - const: mod
38      - const: ram
39
40  resets:
41    maxItems: 1
42
43  port:
44    $ref: /schemas/graph.yaml#/$defs/port-base
45    description: Parallel input port, connect to a parallel sensor
46
47    properties:
48      endpoint:
49        $ref: video-interfaces.yaml#
50        unevaluatedProperties: false
51
52        properties:
53          bus-width:
54            enum: [ 8, 10, 12, 16 ]
55
56          pclk-sample: true
57          hsync-active: true
58          vsync-active: true
59
60        required:
61          - bus-width
62
63    unevaluatedProperties: false
64
65  ports:
66    $ref: /schemas/graph.yaml#/properties/ports
67
68    properties:
69      port@0:
70        $ref: "#/properties/port"
71
72      port@1:
73        $ref: /schemas/graph.yaml#/properties/port
74        description: MIPI CSI-2 bridge input port
75
76      port@2:
77        $ref: /schemas/graph.yaml#/properties/port
78        description: Internal output port to the ISP
79
80    anyOf:
81      - required:
82          - port@0
83      - required:
84          - port@1
85
86required:
87  - compatible
88  - reg
89  - interrupts
90  - clocks
91  - clock-names
92  - resets
93
94oneOf:
95  - required:
96      - ports
97  - required:
98      - port
99
100additionalProperties: false
101
102examples:
103  - |
104    #include <dt-bindings/interrupt-controller/arm-gic.h>
105    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
106    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
107
108    csi1: csi@1cb4000 {
109        compatible = "allwinner,sun8i-v3s-csi";
110        reg = <0x01cb4000 0x1000>;
111        interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
112        clocks = <&ccu CLK_BUS_CSI>,
113                 <&ccu CLK_CSI1_SCLK>,
114                 <&ccu CLK_DRAM_CSI>;
115        clock-names = "bus",
116                      "mod",
117                      "ram";
118        resets = <&ccu RST_BUS_CSI>;
119
120        ports {
121            #address-cells = <1>;
122            #size-cells = <0>;
123
124            port@0 {
125                reg = <0>;
126                /* Parallel bus endpoint */
127                csi1_ep: endpoint {
128                    remote-endpoint = <&adv7611_ep>;
129                    bus-width = <16>;
130
131                    /*
132                     * If hsync-active/vsync-active are missing,
133                     * embedded BT.656 sync is used.
134                     */
135                    hsync-active = <0>; /* Active low */
136                    vsync-active = <0>; /* Active low */
137                    pclk-sample = <1>;  /* Rising */
138                };
139            };
140        };
141    };
142
143...
144