1# SPDX-License-Identifier: GPL-2.0 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-csi.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Allwinner A31 CMOS Sensor Interface (CSI) 8 9maintainers: 10 - Chen-Yu Tsai <wens@csie.org> 11 - Maxime Ripard <mripard@kernel.org> 12 13properties: 14 compatible: 15 enum: 16 - allwinner,sun6i-a31-csi 17 - allwinner,sun8i-a83t-csi 18 - allwinner,sun8i-h3-csi 19 - allwinner,sun8i-v3s-csi 20 - allwinner,sun50i-a64-csi 21 22 reg: 23 maxItems: 1 24 25 interrupts: 26 maxItems: 1 27 28 clocks: 29 items: 30 - description: Bus Clock 31 - description: Module Clock 32 - description: DRAM Clock 33 34 clock-names: 35 items: 36 - const: bus 37 - const: mod 38 - const: ram 39 40 resets: 41 maxItems: 1 42 43 port: 44 $ref: /schemas/graph.yaml#/$defs/port-base 45 description: Parallel input port, connect to a parallel sensor 46 47 properties: 48 endpoint: 49 $ref: video-interfaces.yaml# 50 unevaluatedProperties: false 51 52 properties: 53 bus-width: 54 enum: [ 8, 10, 12, 16 ] 55 56 pclk-sample: true 57 hsync-active: true 58 vsync-active: true 59 60 required: 61 - bus-width 62 63 unevaluatedProperties: false 64 65 ports: 66 $ref: /schemas/graph.yaml#/properties/ports 67 68 properties: 69 port@0: 70 $ref: "#/properties/port" 71 72 port@1: 73 $ref: /schemas/graph.yaml#/properties/port 74 description: MIPI CSI-2 bridge input port 75 76 anyOf: 77 - required: 78 - port@0 79 - required: 80 - port@1 81 82required: 83 - compatible 84 - reg 85 - interrupts 86 - clocks 87 - clock-names 88 - resets 89 90oneOf: 91 - required: 92 - ports 93 - required: 94 - port 95 96additionalProperties: false 97 98examples: 99 - | 100 #include <dt-bindings/interrupt-controller/arm-gic.h> 101 #include <dt-bindings/clock/sun8i-v3s-ccu.h> 102 #include <dt-bindings/reset/sun8i-v3s-ccu.h> 103 104 csi1: csi@1cb4000 { 105 compatible = "allwinner,sun8i-v3s-csi"; 106 reg = <0x01cb4000 0x1000>; 107 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; 108 clocks = <&ccu CLK_BUS_CSI>, 109 <&ccu CLK_CSI1_SCLK>, 110 <&ccu CLK_DRAM_CSI>; 111 clock-names = "bus", 112 "mod", 113 "ram"; 114 resets = <&ccu RST_BUS_CSI>; 115 116 ports { 117 #address-cells = <1>; 118 #size-cells = <0>; 119 120 port@0 { 121 reg = <0>; 122 /* Parallel bus endpoint */ 123 csi1_ep: endpoint { 124 remote-endpoint = <&adv7611_ep>; 125 bus-width = <16>; 126 127 /* 128 * If hsync-active/vsync-active are missing, 129 * embedded BT.656 sync is used. 130 */ 131 hsync-active = <0>; /* Active low */ 132 vsync-active = <0>; /* Active low */ 133 pclk-sample = <1>; /* Rising */ 134 }; 135 }; 136 }; 137 }; 138 139... 140