xref: /freebsd/sys/contrib/device-tree/Bindings/media/allwinner,sun6i-a31-csi.yaml (revision 43a5ec4eb41567cc92586503212743d89686d78f) 
1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-csi.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Allwinner A31 CMOS Sensor Interface (CSI) Device Tree Bindings
8
9maintainers:
10  - Chen-Yu Tsai <wens@csie.org>
11  - Maxime Ripard <mripard@kernel.org>
12
13properties:
14  compatible:
15    enum:
16      - allwinner,sun6i-a31-csi
17      - allwinner,sun8i-a83t-csi
18      - allwinner,sun8i-h3-csi
19      - allwinner,sun8i-v3s-csi
20      - allwinner,sun50i-a64-csi
21
22  reg:
23    maxItems: 1
24
25  interrupts:
26    maxItems: 1
27
28  clocks:
29    items:
30      - description: Bus Clock
31      - description: Module Clock
32      - description: DRAM Clock
33
34  clock-names:
35    items:
36      - const: bus
37      - const: mod
38      - const: ram
39
40  resets:
41    maxItems: 1
42
43  port:
44    $ref: /schemas/graph.yaml#/$defs/port-base
45
46    properties:
47      endpoint:
48        $ref: video-interfaces.yaml#
49        unevaluatedProperties: false
50
51        properties:
52          bus-width:
53            enum: [ 8, 10, 12, 16 ]
54
55          pclk-sample: true
56          hsync-active: true
57          vsync-active: true
58
59        required:
60          - bus-width
61
62    additionalProperties: false
63
64required:
65  - compatible
66  - reg
67  - interrupts
68  - clocks
69  - clock-names
70  - resets
71
72additionalProperties: false
73
74examples:
75  - |
76    #include <dt-bindings/interrupt-controller/arm-gic.h>
77    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
78    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
79
80    csi1: csi@1cb4000 {
81        compatible = "allwinner,sun8i-v3s-csi";
82        reg = <0x01cb4000 0x1000>;
83        interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
84        clocks = <&ccu CLK_BUS_CSI>,
85                 <&ccu CLK_CSI1_SCLK>,
86                 <&ccu CLK_DRAM_CSI>;
87        clock-names = "bus",
88                      "mod",
89                      "ram";
90        resets = <&ccu RST_BUS_CSI>;
91
92        port {
93            /* Parallel bus endpoint */
94            csi1_ep: endpoint {
95                remote-endpoint = <&adv7611_ep>;
96                bus-width = <16>;
97
98                /*
99                 * If hsync-active/vsync-active are missing,
100                 * embedded BT.656 sync is used.
101                 */
102                 hsync-active = <0>; /* Active low */
103                 vsync-active = <0>; /* Active low */
104                 pclk-sample = <1>;  /* Rising */
105            };
106        };
107    };
108
109...
110