xref: /freebsd/sys/contrib/device-tree/Bindings/leds/richtek,rt8515.yaml (revision e6bfd18d21b225af6a0ed67ceeaf1293b7b9eba5) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/leds/richtek,rt8515.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Richtek RT8515 1.5A dual channel LED driver
8
9maintainers:
10  - Linus Walleij <linus.walleij@linaro.org>
11
12description: |
13  The Richtek RT8515 is a dual channel (two mode) LED driver that
14  supports driving a white LED in flash or torch mode. The maximum
15  current for each mode is defined in hardware using two resistors
16  RFS and RTS.
17
18properties:
19  compatible:
20    const: richtek,rt8515
21
22  enf-gpios:
23    maxItems: 1
24    description: A connection to the 'ENF' (enable flash) pin.
25
26  ent-gpios:
27    maxItems: 1
28    description: A connection to the 'ENT' (enable torch) pin.
29
30  richtek,rfs-ohms:
31    minimum: 7680
32    maximum: 367000
33    description: The resistance value of the RFS resistor. This
34      resistors limits the maximum flash current. This must be set
35      for the property flash-max-microamp to work, the RFS resistor
36      defines the range of the dimmer setting (brightness) of the
37      flash LED.
38
39  richtek,rts-ohms:
40    minimum: 7680
41    maximum: 367000
42    description: The resistance value of the RTS resistor. This
43      resistors limits the maximum torch current. This must be set
44      for the property torch-max-microamp to work, the RTS resistor
45      defines the range of the dimmer setting (brightness) of the
46      torch LED.
47
48  led:
49    type: object
50    $ref: common.yaml#
51    properties:
52      function: true
53      color: true
54      flash-max-timeout-us: true
55
56      flash-max-microamp:
57        maximum: 700000
58        description: The maximum current for flash mode
59          is hardwired to the component using the RFS resistor to
60          ground. The maximum hardware current setting is calculated
61          according to the formula Imax = 5500 / RFS. The lowest
62          allowed resistance value is 7.86 kOhm giving an absolute
63          maximum current of 700mA. By setting this attribute in
64          the device tree, you can further restrict the maximum
65          current below the hardware limit. This requires the RFS
66          to be defined as it defines the maximum range.
67
68      led-max-microamp:
69        maximum: 700000
70        description: The maximum current for torch mode
71          is hardwired to the component using the RTS resistor to
72          ground. The maximum hardware current setting is calculated
73          according to the formula Imax = 5500 / RTS. The lowest
74          allowed resistance value is 7.86 kOhm giving an absolute
75          maximum current of 700mA. By setting this attribute in
76          the device tree, you can further restrict the maximum
77          current below the hardware limit. This requires the RTS
78          to be defined as it defines the maximum range.
79
80    additionalProperties: false
81
82required:
83  - compatible
84  - ent-gpios
85  - enf-gpios
86  - led
87
88additionalProperties: false
89
90examples:
91  - |
92    #include <dt-bindings/gpio/gpio.h>
93    #include <dt-bindings/leds/common.h>
94
95    led-controller {
96        compatible = "richtek,rt8515";
97        enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
98        ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
99        richtek,rfs-ohms = <16000>;
100        richtek,rts-ohms = <100000>;
101
102        led {
103            function = LED_FUNCTION_FLASH;
104            color = <LED_COLOR_ID_WHITE>;
105            flash-max-timeout-us = <250000>;
106            flash-max-microamp = <150000>;
107            led-max-microamp = <25000>;
108        };
109    };
110
111...
112